Silicon Investor (SI) -- The First Internet Community

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Pastimes : Dream Machine ( Build your own PC ) -- Ignore unavailable to you. Want to Upgrade?

To: Zeuspaul who wrote (9737)	12/21/1999 12:16:00 AM
From: bluejeans	Read Replies (1) \| Respond to of 14778

I have a Dell XPS 200. I will check my books in the morning but both hard drives are listed under primary in the bios setup. O and 1 . The secondary is the Cd Rom. Are you changing the jumpers for slave and master? Yes, but not with the machine on.<G> However, with the alt key I won't need to do that unless I find out that is also a problem. How's the cats ?

To: Zeuspaul who wrote (9737)	12/21/1999 8:36:00 AM
From: John Mireley	Read Replies (1) \| Respond to of 14778

I have a hard drive with NT 4 on it that will not boot on IDE primary master when used with a new MB (went from Matsonic 5205 to FIC 503+). It will boot from the IDE secondary master. What might be the cause and a fix?

To: Zeuspaul who wrote (9737)	12/21/1999 10:39:00 PM
From: belker	Read Replies (1) \| Respond to of 14778

I wonder if you might have any idea as to what is causing my computer to act in a maddeningly quirky way. What is happening is that sometimes, when I am online, and I click on a link or a button, say to place a trade, my computer does not respond--the modem icon does not blink, and anywhere from five seconds to a minute pass and then the icon starts flashing and the connection is made. This happens sporadically but frequently throughout the day--at least several times an hour--sometimes as much as not. Unfortunately I am using a browser based broker right now and this adds a bit to the stress. The background to this that I have just built a new computer and networked it to the old computer. I have only file and printer sharing right now. The modem, a US Robotics 56K is in the old box and is not shared. (After the first of the year I will have ADSL in the new box and then will share that, probably with SyGate.) It was within the last week that I installed the NICs and connected the machines. After that the trouble started. The network components are: Client for Microsoft Networks Dial-up Adapter Linksys LNE100TX Fast Ethernet Adapter TCP/IP->Dial-up Adapter TCP/IP-> Linksys LNE100TX Fast Ethernet Adapter File and printer sharing for Microsoft Networks This is identical on both machines although Win98 did install Microsoft Family Logon on the new machine in addition to Client for MS Networks.I removed Family Logon last night but it didn't make any different. Win98SE on both machines. I am just assuming this is related to the networking. Any ideas? Thanks, Bob