Silicon Investor (SI) -- The First Internet Community

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Politics : Formerly About Advanced Micro Devices -- Ignore unavailable to you. Want to Upgrade?

To: Joe NYC who wrote (94911)	2/24/2000 10:36:00 AM
From: Scot	Respond to of 1570486

Joe, What is the voltage of the K6-2 500? Some of the older motherboards don't have Voltage settings for less than 2.8V I believe it is 2.2V. Most (all?) super socket 7 MBs should support that voltage. But you may be out of luck with an older socket 7. Supposedly, the .18 k6-2+ was also at 2.2V for compatability purposes. I don't know how they pulled this off, but that what Ace said in their review. But we'll probably never see the k6-2+, so the issue is moot. -Scot