SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Technology Stocks : Echelon Corporation (ELON) -- Ignore unavailable to you. Want to Upgrade?


To: KW Wingman who wrote (1295)3/9/2000 4:56:00 AM
From: William Peavey  Read Replies (2) | Respond to of 3076
 
KW,
Thanks for taking the time to put that fascinating response together. Coming from an aviation background, years ago, I have been intrigued by the Raytheon Beech division's LonWorks Control by Light bi-directional fiber technology. Presently used in a busjet, their Commercial Electronics division also deploys this system for building automation in a "ring redundant" topology that provides two paths between all nodes on the network. If a device or cable should fail, the subsystem stays up and running. The problem is reported, and the faulty device or cable can be hot-swapped for repair or replacement. The Raytheon brochure which I obtained at the OpenSystems99 show, goes on to say that fiber optic cable is a very efficient transmission medium and can transmit signals up to thirty kilometers without repeaters.
Also with fiber, as opposed to cable there is no chance of electrical fire or spark, either. Finally, it is immune to electrical spikes and interference, moisture and chemicals in harsh environments.

Your comments on a demanding, harsh environment prompted me to look this up, although I found only the commercial buildings/automation brochure, not the aviation one.
You might enjoy control-by-light.com

Bill



To: KW Wingman who wrote (1295)3/9/2000 8:49:00 AM
From: Boplicity  Read Replies (1) | Respond to of 3076
 
re: Yes this network was a serial network on a dual coax on different runs. It had a loop, it was not like a string of serial lights (one out all out). Critical systems also have hard wire back ups and in the case of the ballast system it also had an emergency hardwire backup and if all that failed it still had manual control backup.

So lonworks can have topology that is a loop or dual coax LAN?

Greg