Silicon Investor (SI) -- The First Internet Community

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Gold/Mining/Energy : Pacific Rim Mining V.PFG -- Ignore unavailable to you. Want to Upgrade?

To: Claude Cormier who wrote (13094)	5/15/2000 1:20:00 PM
From: ogi	Read Replies (1) \| Respond to of 14627

Claude: I'll hazard an uninformed guess that it will take multiple 100 metre + intercepts of over 2.5gt. I am hoping that results will be good but not up to expectation and provide an entry point based on results and not conjecture. If not,I hope this exceeds expectations and lots of people make money. Regards, Ogi

To: Claude Cormier who wrote (13094)	5/15/2000 1:49:00 PM
From: Quickdraw	Read Replies (1) \| Respond to of 14627

Claude, PFG have been trying to reduce risk over these months. They have done this by taking surface/tunnel samples in the corridor which have an average grade of 2.28g/t , cliff samples that show depth (up to 176m) and tunnel samples that show higher grade (over 6 g/t avg up to 30m deep) When drilling starts it is time to prove up the potential many in the market believe Luicho has. I believe the first drill results in the central area will have to prove the depth potential of at least 176 meters, but as you say, more than likely 200m plus. If assays in this central region complement what is being found on surface and in tunnels to 30m down, with an expected reduction in grade thereafter, we will see some immediate upward movement. I would suggest PFG, within the first 10 or so holes drilled will attempt a test hole outside of the corridor to test for blue-sky potential, and of course holes in the other two known zones to get an idea of size. As drilling expands further along the corridor and if grade continues to agree for the most part with surface sampling, it'll move much higher. Just my thoughts, Qd