Silicon Investor (SI) -- The First Internet Community

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Pastimes : Let's Talk About Our Equipment!!! -- Ignore unavailable to you. Want to Upgrade?

To: Joe Lyddon who wrote (21)	6/1/2000 1:14:00 PM
From: 10K a day	Read Replies (1) \| Respond to of 132

Ryobi! That has a nice ring to it :0)

To: Joe Lyddon who wrote (21)	6/1/2000 3:20:00 PM
From: Gidget	Read Replies (1) \| Respond to of 132

Well,we have had great luck with ours. We have Ryobi model 990r brushcutter which we modify the engine from 33mm(1.26)bore to 35mm. Port and polish the intake and outake manifold,plus add a larger jet-system for the carb. Now that brought our RPM up to about 11000 to 12500 from the standard of 7500 and wow does it fly (have to wear weights on my legs) to keep from flying await. Here is what we have add: Blower/Vacuum-standard Hedge Trimmer- blew out the ring and pinion gears this last week end(bummer) Tree Pruner- cuts great but strip the cable on it,I think too big of trees and using the extra extention. Straight Shaft Trimmer-made it from a two hole to a four hole and took the bottom bottem off for quick-change. Also making a spool with bicycle chains,should be hot. Cultivator-now this is hot I can even right and wow does it dig and dig and dig. Well,back to the gardens got roses come out all over.