SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Technology Stocks : Rambus (RMBS) - Eagle or Penguin -- Ignore unavailable to you. Want to Upgrade?


To: Ali Chen who wrote (44038)6/11/2000 12:40:00 AM
From: Bilow  Read Replies (1) | Respond to of 93625
 
Hi Ali Chen; I might as well beat John Walliker to the punch regarding high impedance of RDRAM outputs...

John's right. Instead of the traditional low impedance voltage drivers, Rambus uses high impedance current drives. This, of course, is why the voltages look like Hell during reads. In particular, this chaos obtains at the driver.

The high impedance drivers idea was another one of the bad ideas used in RDRAM. And by the way, at the same time as they reduced the supply voltage for the part, they also decided to switch from voltage mode outputs to current mode outputs, thus increasing the output compliance range problem.

-- Carl



To: Ali Chen who wrote (44038)6/11/2000 12:58:00 PM
From: Dan3  Respond to of 93625
 
Re: Let me remind you that the difference between practice and theory is much bigger in practice than in
theory.


I suppose I've heard it before, but I remain

<ROTFLMAO>

.
.
.

Still laughing!

Regards,

Dan



To: Ali Chen who wrote (44038)6/12/2000 4:12:00 PM
From: Dave B  Read Replies (1) | Respond to of 93625
 
P.S. The tone of my post was intentionally aggressive,
for the sake of delivering the point to slow members.
Do not feel personally offended:).


Not aggressive; obnoxious. Must go with being a bear. What a screwed up attitude you have. If you want to counter someone's argument, obnoxiousness is sure way to make sure they pay no attention to your arguments at all. Of course, sometimes that's useful when your arguments are invalid.