SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Pastimes : Looking for Automotive Genius -- Ignore unavailable to you. Want to Upgrade?

To: Tatnic who wrote (4)12/15/2000 6:54:08 AM
From: Susan  Read Replies (1) | Respond to of 16
 
first check and clean all the electric connections, battery terminals, grounds and where hot wires are bolted to something, like the starter solenoid. Make sure all is happy clean & shiny
Then check the solenoid itself as the grease inside gets cold and sticky in the cold. All that being OK it's probably the starter itself. You can get a rebuild or rebuilt unit at a fraction of cost of new



To: Tatnic who wrote (4)12/15/2000 11:17:47 AM
From: grampa  Respond to of 16
 
I agree -- strange.

A side benefit of this thread may be realized if we each tell what the problem TURNS OUT TO BE ??

And let's vote each year end who the "genius" turns out to be for the past year.


HomeMailHotSubjectMarksPeopleMarksKeepersSettings
Terms Of UseContact UsCopyright/IP PolicyPrivacy PolicyAbout UsFAQAdvertise on SI
© 2025 Knight Sac Media.  Data provided by Twelve Data, Alpha Vantage, and CityFALCON News