Silicon Investor (SI) -- The First Internet Community

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Technology Stocks : Nokia (NOK) -- Ignore unavailable to you. Want to Upgrade?

To: Eric L who wrote (13347)	7/3/2001 11:00:30 PM
From: S100	Read Replies (1) \| Respond to of 34857

Do not think it is 1xRTT since this is in one of the SAR docs. snip The equipment, KWC model # 2135, is for mobile station cellular and PCS system use. The 2135 is in full compliance with all parts of EIA/TIA/IS-98-B Mobile Station-Land Station Compatibility Specification, issue July 1998, and also in full compliance with all parts of ANSI J-STD-018, Recommended Minimum Performance Requirements for 1.8 to 2 GHz Code Division Multiple Access (CDMA) Personal Stations, issue July 1996. snip Also, has several pages from old spec. snip The CDMA mode is described in the following pages from the TIA/EIA /IS-95B Standard. The justification for the CDMA bandwidth of 1.25 MHz is that the chip rate is 1.2288 MHz (see page 6-35 of IS-95B). The 1.25MHz is measured at the 3dB down bandwidth. Channel spacing is normally set at this 1.25 MHz. In addition the reference baseband filtering requirements are shown on page 6-60 of IS95B. The Z-transform filter coefficient for the recommended baseband filter are shown on page 6-61, and also yield a “necessary bandwidth” of 1.25 MHz based on optimal detection and channel capacity theory. snip You are more familiar with these specs than I, what do you think. Wish the parts list and/or schematics were there.

To: Eric L who wrote (13347)	7/4/2001 5:58:14 PM
From: 49thMIMOMander	Read Replies (1) \| Respond to of 34857

The Nokia 6-series has this nice removable "name plate", any bundled operator can snap in their own, and the user can snip it off, if the operator want to open the box. It is funny how all these things disappear when markets are unbundled, get the SIM-card from the operator and the handset from whatever store, mail order whatever gives the best deal with the original box intact. If one is tired of the operator, get a new number and a SIM card, if it is the phone, get another one, same or different store. And some day the bundle-dependent operators will have to implement fixed, shared IP adresses both for my refrigator and me. I don't switch the name of my street every time I cancle or order an old or new newspaper.. Ilmarinen.xxxx.fi