Silicon Investor (SI) -- The First Internet Community

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Gold/Mining/Energy : Gold Price Monitor -- Ignore unavailable to you. Want to Upgrade?

To: Bill Jackson who wrote (74699)	8/9/2001 1:04:05 AM
From: E. Charters	Read Replies (1) \| Respond to of 116753

I think they should do it my way and not use Ti electrodes at all but a slurry of calcium chlor and Ti. The moving Ti slurry contacts the negative plate and gets charged and changes. You have to use a plate that is coated with something that does not easily form a chloride. Gold would be preferrable I would think as it goes very slowly into solution as a chloride and is very conductive. In order to reduce the Ti oxide slightly for the process to work you may have to treat it with acid. This is the tricky part. Perhaps reduction would occur in the salt bath if inductively heated and strongly charged. EC<:-}