Silicon Investor (SI) -- The First Internet Community

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Strategies & Market Trends : Paint The Table -- Ignore unavailable to you. Want to Upgrade?

To: Shoot1st who wrote (2496)	11/16/2001 9:53:46 PM
From: Peach	Read Replies (3) \| Respond to of 23786

Okay, Shootie, I will crank up the ozone. I have thought of you several times today and figured out what you would advise. Thank you.

To: Shoot1st who wrote (2496)	11/17/2001 12:06:59 AM
From: Lost1	Read Replies (3) \| Respond to of 23786

ozone? You mean that stuff we used to spray to get rid of the "aroma" after a session?

To: Shoot1st who wrote (2496)	11/17/2001 8:43:12 AM
From: Patrick Slevin	Read Replies (1) \| Respond to of 23786

They had an interesting flood around here some years back. Mooks that ran a service went in to take out some 6 to 8 feet of water out of a cellar. Well, it isn't as easy as that. When you have that kind of water then the water table around the building is also high and is pressing against the building with force. See Vector Analysis, Beginners Level, Chapter One. The foot-pounds pressing against the walls on the outside cancel out with the foot-pounds inside. This leaves the wall with the intended vertical load and no horizontal load. So if you pump out the water internally you have a horizontal load on the wall which was not part of the design. Yes, the building caved in. Freakin' Artesian Wells, can't trust 'em.