SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Technology Stocks : Intel Corporation (INTC) -- Ignore unavailable to you. Want to Upgrade?


To: Tenchusatsu who wrote (150221)11/28/2001 8:12:25 PM
From: milo_morai  Respond to of 186894
 
Tench "NetBurst" doesn't speed up your Internet either. So we know Intel was lying on that one.

So I'd say let's move on.

M.



To: Tenchusatsu who wrote (150221)11/28/2001 9:33:01 PM
From: AK2004  Respond to of 186894
 
Ten
it is a matter of interpretation, I really do not care if my computer runs 1GHz, 2GHz or 200GHz chips but what I do care is how fast it performs the tasks.
Regards
-Albert



To: Tenchusatsu who wrote (150221)11/28/2001 11:28:40 PM
From: Ali Chen  Read Replies (2) | Respond to of 186894
 
"..to be compared to a clock speed. ...Now tell me how "2.0A" or "300A" or "600EB" is misleading."

Cut the BS, Ten, don't be ridiculous.
Which frequency are you talking about:

developer.intel.com

"Different parts of the Pentium 4 processor run at different
clock frequencies. The frequency of each section of logic
is set to be appropriate for the performance it needs to
achieve. The highest frequency section (fast clock) was
set equal to the speed of the critical ALU-bypass
execution loop that is used for most instructions in integer
programs. Most other parts of the chip run at half of the
3GHz fast clock since this makes these parts much easier
to design. A few sections of the chip run at a quarter of
this fast-clock frequency making them also easier to
design. The bus logic runs at 100MHz, to match the
system bus needs."

- Ali