Silicon Investor (SI) -- The First Internet Community

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Pastimes : ceramics-clay-pottery -- Ignore unavailable to you. Want to Upgrade?

To: AugustWest who wrote (40)	12/8/2001 6:38:16 PM
From: AugustWest	Read Replies (1) \| Respond to of 338

Dull red. So I'm beyond the point of anything that migh have happened to ruin the load. If the peices weren't dry enough or taken up too fast they would/will pop just like a piece of shale when you build a camp fire on it. And you don't get to know until unload the kiln. So now I just take it up to temperature and open it up in a few days(not until it's dropped to about 200-300°. At that point it's safe to lift the lid a few inches to help the cooling process along. Also, if clay is not properly wedged(like kneeding dough) it will have air bubbles that will pop during the bisque firing. It always pissed me off in college when I would lose a piece because some goof ceramics 1 student's thick air bubble filled piece would pop and take several peices next to it. It didn't take long for me to take charge of loading the kilns and making sure if I had to put someone's peices next to mine, they were pieces I could tell would be okay.

To: AugustWest who wrote (40)	12/8/2001 6:40:49 PM
From: Peach	Read Replies (1) \| Respond to of 338

Thank you. Your spelling is fine, no need to check it. This is very exciting. Good luck!