Silicon Investor (SI) -- The First Internet Community

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Pastimes : Computer Learning -- Ignore unavailable to you. Want to Upgrade?

To: hcm1943 who wrote (31879)	1/21/2003 11:47:23 AM
From: Rick Faurot	Read Replies (1) \| Respond to of 110652

The cable is supposed to connect to your sound card. If you look inside your box it will be somewhere in a stack of PCI slots, most of which will be empty. If your drive has a headphone jack on the front, that will feed your speakers or headphones without the sound cable connected to the sound card. If you go to control panel, sounds and check enable digital sound, you should be able to get sound out of your mini port on the back of the box to power your speakers without the cable being connected, however this will disable the headphone jack on the front of the CDRW drive. The headphone jack only works on analog.