SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Technology Stocks : Semi Equipment Analysis -- Ignore unavailable to you. Want to Upgrade?


To: Gottfried who wrote (9432)4/14/2003 12:00:27 PM
From: advocatedevil  Read Replies (2) | Respond to of 95561
 
"300mm's Delay"
By Suzanne Deffree -- 4/8/2003
Electronic News

e-insite.net

Four years after the first 300mm fab was built and pilot production started, the promised land is still out of sight.

According to a recent report by researcher iSuppli Corp., 300mm activity slowed significantly after its initial hype cooled down and now -- with a tech recession still under way, and the geopolitical climate and overcapacity plaguing the semiconductor market -- 300mm's necessity is being examined closer than ever.

"Although the collapse of the semiconductor market in 2001 was a major factor in inhibiting the conversion to 300mm manufacturing, it is clearly evident now that the original premise for 300mm conversion needs to be challenged," Len Jelinek, principal analyst at iSuppli, said in the report. "First does the semiconductor industry need all this additional capacity, especially with the recent expansions of 200mm foundry capacity? Second, does 300mm manufacturing fit better in a foundry model or IDM model? Or will a new model be required for 300mm manufacturing to be successful? Third, what is the impact of feature size reductions on expanding wafer sizes?"

iSuppli found that long-term cost reductions gained by entering 300mm manufacturing will be required for companies to remain competitive on commodity products. Memory makers, which represent 36 percent of 300mm now and are expected increase to 67 percent in the next three years, must increase capacity while simultaneously reducing costs. Increased unit output and economies of scale will help aid manufactures in that way, but iSuppli also noted that labor has become a minimal part of leading-edge manufacturing. To that measure, suppliers will not continue to choose locations for low labor costs. Instead, cost benefits will come from infrastructure and tax breaks. Infineon Technologies AG, for one, has announced plans to move its headquarters out of Germany and to a more tax-friendly location with Switzerland at the top of its prospective list.

Jelinek further said that current business models will not drive 300mm conversion as they are not "friendly" with second-tier, smaller fables companies, which cannot initially sell large volumes, and force companies to split investment between technology and capacity.

"As IDMs announced their intentions to reduce capital expansions, the foundry model received positive reinforcement," he noted. "Foundries offer the unique ability to spread costs across numerous customers, allowing the foundries to continue to invest in both technology and capacity. Today it has become customary for foundry service providers to engage with one key partner that provides licensed technology in exchange for capacity."

Partnering overall, he said, will be a driver toward 300mm success on both large and small company terms. Both United Microelectronics Corp., with demand coming from its key partner Xilinx Inc., and Taiwan Semiconductor Manufacturing Co. Ltd., with high-volume customers like Motorola Inc. and Qualcomm Inc., have done such.

Still, Jelinek said that foundries need to refocus on small volume customers and develop a more flexible system if they wish to drive 300mm manufacturing.

FSI International Chairman and CEO Don Mitchell speaking at europa 2003 added another dynamic to the 300mm slowdown concerning capacity and smaller companies. "Of those that are looking at 300 mm investment, not only do you have to have the capacity to invest, but you’ve got to have the client’s mind [in] that factory," he said. "I think the one learning that people have come away with is that they have already built their pilot lines and they are loading them. You don’t make any money in 300mm until you give up capacity utilization at a pretty high rate. And so it takes some enormous amount of customer volume to make a lot of money in 300 mm. Now a few companies have that."

Meanwhile, iSuppli reported that reductions in feature size and expanding 200mm capacity has contributed to 300mm's slowdown. As unit volume increases while feature size decreases, second-tier component suppliers do not need to convert to 300mm to stay cost competitive and keep output up. Feature size reductions for small volume custom products can be obtained from current 200mm technology on 0.13-micron processes, iSuppli said.

"The first foundry that develops a 0.90nm technology using 200mm wafers will capture significant market share from second-tier semiconductor companies," Jelinek said.

Despite all of the hold ups, iSuppli believes that by 2010 20 percent of semiconductor manufacturing will be done with 300mm wafers. About 40 percent of 300mm operational fabs will be located in Taiwan by 2005, contributing to the total 70 percent to be found in Asia.

"The current conversion to 300mm manufacturing is clearly being driven by cost reductions on commodity products," Jelinek said. "Companies recognize that in order to remain competitive they must enter into 300mm manufacturing or face the loss of market share and margins. Although the rate of 300mm expansion has slowed, iSuppli believes that as demand increases in 2003 and 2004, the rate of 300mm manufacturing will increase."

AdvocateDevil



To: Gottfried who wrote (9432)4/14/2003 7:21:50 PM
From: Gottfried  Read Replies (2) | Respond to of 95561
 
bpNDX unchanged at 56%
Mar28 Mar31 Apr01 Apr02 Apr03 Apr04 Apr07 Apr08 Apr09 Apr10 Apr11 Apr14


























AAPL AAPL AAPL AAPL
ADBE ADBE ADBE ADBE ADBE ADBE
ALTR ALTR ALTR ALTR ALTR ALTR
AMAT AMAT AMAT AMAT AMAT AMAT
AAPL AAPL AMGN AMGN AMGN AMGN AMGN AMGN
ADBE ADBE AMZN AMZN AMZN AMZN AMZN AMZN
ALTR ALTR APOL APOL APOL APOL APOL APOL
AAPL AMAT AMAT BBBY BBBY BBBY BBBY BBBY BBBY
AAPL AAPL AAPL ADBE AMGN AMGN BGEN BGEN BGEN BGEN BGEN BGEN
ADBE ADBE ADBE ALTR AMZN AMZN BMET BMET BMET BMET BMET BMET
ALTR ALTR ALTR AMAT APOL APOL CHKP CHKP CHKP CHKP CHKP CHKP
AMAT AMAT AMAT AMGN BBBY BBBY CHRW CHRW CHRW CHRW CHRW CHRW
AMGN AMGN AMGN AMZN BGEN BGEN CMCSA CMCSA CMCSA CMCSA CMCSA CMCSA
AMZN AMZN AMZN APOL BMET BMET CMVT CMVT CMVT CMVT CMVT CMVT
APOL APOL APOL BBBY CHKP CHKP COST COST COST COST COST COST
BBBY BBBY BBBY BMET CHRW CHRW CTAS CTAS CTAS CTAS CTAS CTAS
BMET BMET BMET CHKP CMCSA CMCSA CTXS CTXS CTXS CTXS CTXS CTXS
CHKP CHKP CHKP CHRW CTAS CTAS DISH DISH DISH DISH DISH DISH
CHRW CHRW CHRW CMCSA CTXS CTXS EBAY EBAY EBAY EBAY EBAY EBAY
CMCSA CMCSA CMCSA CTAS DISH DISH ERTS ERTS ERTS ERTS ERTS ERTS
CTAS CTAS CTAS CTXS EBAY EBAY ESRX ESRX ESRX ESRX ESRX ESRX
DISH DISH DISH DISH ERTS ERTS EXPD EXPD EXPD EXPD EXPD EXPD
EBAY EBAY EBAY EBAY ESRX ESRX FAST FAST FAST FAST FAST FAST
ERTS ERTS ERTS ERTS EXPD EXPD GENZ GENZ GENZ GENZ GENZ GENZ
ESRX ESRX ESRX ESRX GENZ GENZ GILD GILD GILD GILD GILD GILD
EXPD EXPD EXPD EXPD GILD GILD HSIC HSIC HSIC HSIC HSIC HSIC
GENZ GENZ GENZ GENZ HSIC HSIC ICOS ICOS ICOS ICOS ICOS ICOS
GILD GILD GILD GILD ICOS ICOS IDPH IDPH IDPH IDPH IDPH IDPH
HSIC HSIC HSIC HSIC INTC IDPH INTC INTC INTC INTC INTC INTC
ICOS ICOS ICOS ICOS JDSU INTC JDSU JDSU JDSU JDSU JDSU JDSU
INTC INTC INTC INTC JNPR JDSU JNPR JNPR JNPR JNPR JNPR JNPR
JDSU JDSU JDSU JDSU KLAC JNPR KLAC KLAC KLAC KLAC KLAC KLAC
JNPR JNPR JNPR JNPR LLTC KLAC LLTC LLTC LLTC LLTC LLTC LLTC
KLAC KLAC KLAC KLAC MEDI LLTC MEDI MEDI MEDI MEDI MEDI MEDI
LLTC LLTC LLTC LLTC MERQ MEDI MERQ MERQ MERQ MERQ MERQ MERQ
MEDI MEDI MEDI MEDI MSFT MERQ MSFT MSFT MSFT MSFT MSFT MSFT
MERQ MERQ MERQ MERQ MXIM MSFT MXIM MXIM MXIM MXIM MXIM MXIM
MSFT MSFT MSFT MSFT NTAP MXIM NTAP NTAP NTAP NTAP NTAP NTAP
MXIM MXIM MXIM MXIM NVDA NTAP NVDA NVDA NVDA NVDA NVDA NVDA
NTAP NTAP NTAP NTAP ORCL NVDA ORCL ORCL ORCL ORCL ORCL ORCL
NVDA NVDA NVDA NVDA PCAR ORCL PCAR PCAR PCAR PCAR PCAR PCAR
ORCL ORCL ORCL ORCL PDCO PCAR PDCO PDCO PDCO PDCO PDCO PDCO
PCAR PCAR PCAR PCAR PIXR PDCO PIXR PIXR PIXR PIXR PIXR PIXR
PDCO PDCO PDCO PDCO PTEN PIXR PTEN PTEN PTEN PTEN PTEN PTEN
PIXR PIXR PIXR PIXR RYAAY PTEN RYAAY RYAAY RYAAY RYAAY RYAAY RYAAY
PTEN PTEN PTEN PTEN SANM RYAAY SANM SANM SANM SANM SANM SANM
RYAAY RYAAY RYAAY RYAAY SBUX SANM SBUX SBUX SBUX SBUX SBUX SBUX
SANM SANM SANM SANM SEBL SBUX SNPS SNPS SNPS SNPS SNPS SNPS
SBUX SBUX SBUX SBUX SNPS SNPS SPLS SPLS SPLS SPLS SPLS SPLS
SEBL SEBL SEBL SEBL SSCC SSCC SSCC SSCC SSCC SSCC SSCC SSCC
SNPS SNPS SNPS SNPS TEVA TEVA TEVA TEVA TEVA TEVA TEVA TEVA
SSCC SSCC SSCC SSCC TMPW TMPW TMPW TMPW TMPW TMPW TMPW TMPW
TEVA TEVA TEVA TEVA USAI USAI USAI USAI USAI USAI USAI USAI
USAI USAI USAI USAI VRTS VRTS VRTS VRTS VRTS VRTS VRTS VRTS
WFMI WFMI WFMI WFMI WFMI WFMI WFMI WFMI WFMI WFMI WFMI WFMI
XLNX XLNX XLNX XLNX XLNX XLNX XLNX XLNX XLNX XLNX XLNX XLNX
YHOO YHOO YHOO YHOO YHOO YHOO YHOO YHOO YHOO YHOO YHOO YHOO

.



To: Gottfried who wrote (9432)4/14/2003 8:34:58 PM
From: StanX Long  Read Replies (1) | Respond to of 95561
 
Gartner predicts chip capital spending growth
4/14/2003 7:40:09 PM

www2.marketwatch.com

SAN FRANCISCO, April 14 (Reuters) - Global spending on equipment for making semiconductors is expected to grow more than 7 percent in 2003, after tumbling more than 37 percent last year, market research firm Gartner Group said on Monday.

An increase in capital spending by chipmakers could indicate a rebound for the industry, which is struggling to recover from its worst-ever downturn.

Uncertainties of war, a sluggish overall economy and budget cuts by corporations have contributed to the chip industry's slow recovery, analysts have said.

"Spending in 2003 will most likely be driven by a reduction of the high degree of uncertainty in the business climate," said Jim Hines, principal analyst for Gartner.

One barometer of capital expenditure plans is fab utilization, or the percentage of capacity at chip production plants that is being used. Higher capacity increases the likelihood of capital spending.

After showing some improvement last year, utilization rates at chip fabrication plants worldwide slid back in the first quarter of 2003.

Slow demand growth in the first half of the year will be matched by marginal increases in capacity and more fab closures, which should keep overall utilization rates flat, Gartner predicted.

Even so utilization rates are expected to be 90 percent at the end of the year, up from about 75 percent now, said Dean Freeman, principal analyst for Gartner.

After tumbling 37.4 percent last year, worldwide capital spending for semiconductors, the brains of computers, is projected to grow 7.2 percent to $30 billion, Gartner said.

Spending on equipment to make wafers, the silicon disks from which the chips are carved, is expected to grow 8.4 percent to $17.5 billion after a 31.7 percent drop last year, according to Gartner.

Spending on packaging and assembly equipment is forecast to grow 21.4 percent to $2.8 billion following a 21.6 percent decline in 2002.

The semiconductor market is "significantly underinvested, and while there is the absence of a driving killer application to incite spending, there are many areas that are ripe for improvement in 2003," Gartner said.

Intel Corp. (INTC) , the biggest purchaser of chip production equipment, has said it plans to cut its 2003 capital spending budget by as much as $1.2 billion from last year's level of $4.7 billion.

For 2004, Gartner is predicting growth rates of 38.9 percent for semiconductor capital spending, 40.5 percent for wafer fab equipment and 36.7 percent for packaging and assembly equipment.

Applied Materials Inc. (AMAT) , the world's biggest maker of chip production tools, said last month it would close offices and cut 14 percent of its workforce in its second major round of layoffs in five months.

Also on Monday, chip equipment tool maker Novellus Systems Inc. (NVLS) said profit quarterly profit rose in line with forecasts but wanred that orders would drop sharply due to hysteria over SARS (Severe Acute Respiratory Syndrome).

© Reuters 2003. All rights reserved. Republication or redistribution of Reuters content, including by caching, framing or similar means, is expressly prohibited without the prior written consent of Reuters. Reuters and the Reuters sphere logo are registered trademarks and trademarks of the Reuters group of companies around the world.


An increase in capital spending by chipmakers could indicate a rebound for the industry, which is struggling to recover from its worst-ever downturn.

Uncertainties of war, a sluggish overall economy and budget cuts by corporations have contributed to the chip industry's slow recovery, analysts have said.

"Spending in 2003 will most likely be driven by a reduction of the high degree of uncertainty in the business climate," said Jim Hines, principal analyst for Gartner.

One barometer of capital expenditure plans is fab utilization, or the percentage of capacity at chip production plants that is being used. Higher capacity increases the likelihood of capital spending.

After showing some improvement last year, utilization rates at chip fabrication plants worldwide slid back in the first quarter of 2003.

Slow demand growth in the first half of the year will be matched by marginal increases in capacity and more fab closures, which should keep overall utilization rates flat, Gartner predicted.

Even so utilization rates are expected to be 90 percent at the end of the year, up from about 75 percent now, said Dean Freeman, principal analyst for Gartner.

After tumbling 37.4 percent last year, worldwide capital spending for semiconductors, the brains of computers, is projected to grow 7.2 percent to $30 billion, Gartner said.

Spending on equipment to make wafers, the silicon disks from which the chips are carved, is expected to grow 8.4 percent to $17.5 billion after a 31.7 percent drop last year, according to Gartner.

Spending on packaging and assembly equipment is forecast to grow 21.4 percent to $2.8 billion following a 21.6 percent decline in 2002.

The semiconductor market is "significantly underinvested, and while there is the absence of a driving killer application to incite spending, there are many areas that are ripe for improvement in 2003," Gartner said.

Intel Corp. (INTC) , the biggest purchaser of chip production equipment, has said it plans to cut its 2003 capital spending budget by as much as $1.2 billion from last year's level of $4.7 billion.

For 2004, Gartner is predicting growth rates of 38.9 percent for semiconductor capital spending, 40.5 percent for wafer fab equipment and 36.7 percent for packaging and assembly equipment.

Applied Materials Inc. (AMAT) , the world's biggest maker of chip production tools, said last month it would close offices and cut 14 percent of its workforce in its second major round of layoffs in five months.

Also on Monday, chip equipment tool maker Novellus Systems Inc. (NVLS) said profit quarterly profit rose in line with forecasts but wanred that orders would drop sharply due to hysteria over SARS (Severe Acute Respiratory Syndrome).

© Reuters 2003. All rights reserved. Republication or redistribution of Reuters content, including by caching, framing or similar means, is expressly prohibited without the prior written consent of Reuters. Reuters and the Reuters sphere logo are registered trademarks and trademarks of the Reuters group of companies around the world.