SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Pastimes : Home on the range where the buffalo roam -- Ignore unavailable to you. Want to Upgrade?

To: David Weis who wrote (12506)3/13/2004 12:56:22 AM
From: Boplicity  Read Replies (1) | Respond to of 13815
 
David, That was G & M Code not C and M it has to do with the controlling of the movement of CNC machines. see this link. cnccontrols.com

what you posted was interesting nonetheless.

I have never heard of MUMPS before.

Thanks,

Greg



To: David Weis who wrote (12506)3/13/2004 1:25:45 AM
From: Boplicity  Read Replies (2) | Respond to of 13815
 
here we go,

There are a considerable number of definitions, some are just rewording, others are different, for the G codes (also know as preparatory functions) and M codes (also know as miscellaneous functions) that can be found in books and on the web.

still why do they use G? maybe for Get or Go

Greg


HomeMailHotSubjectMarksPeopleMarksKeepersSettings
Terms Of UseContact UsCopyright/IP PolicyPrivacy PolicyAbout UsFAQAdvertise on SI
© 2026 Knight Sac Media.  Data provided by Twelve Data, Alpha Vantage, and CityFALCON News