SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Pastimes : The United States Marine Corps -- Ignore unavailable to you. Want to Upgrade?

To: goldworldnet who wrote (3626)5/24/2004 8:09:23 AM
From: Ish  Read Replies (1) | Respond to of 6227
 
You may need a steering gear box adjustment or new ball joints if it wanders back and forth.



To: goldworldnet who wrote (3626)5/24/2004 10:04:43 AM
From: JDN  Read Replies (1) | Respond to of 6227
 
I dont know anything about Scouts, but when it wanders you have to look at the pitman arm and see if it is the right length to keep the tie rod and the drag link relatively parellel to the ground. If you did put a suspension lift on and it was over say 4" usually need to replace the pitman arm. Did a 4x4 shop do this work? jdn


HomeMailHotSubjectMarksPeopleMarksKeepersSettings
Terms Of UseContact UsCopyright/IP PolicyPrivacy PolicyAbout UsFAQAdvertise on SI
© 2026 Knight Sac Media.  Data provided by Twelve Data, Alpha Vantage, and CityFALCON News