SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Microcap & Penny Stocks : PLNI - Game Over -- Ignore unavailable to you. Want to Upgrade?

To: tonto who wrote (5338)7/7/2006 11:48:30 AM
From: scion  Read Replies (1) | Respond to of 12518
 
The products are brittle because the raw materials used are often of poor quality and the physical properties of the parts are only as good as the raw material allows.

The specifications used in FL are fairly typical -

972-3.3 Plastic Chairs and Bolsters: Plastic may either be reinforced or non-reinforced, but shall meet the following requirements for a working temperature range of 20 to 150ºF [-7 to 65ºC]:

Property Requirement Test Method
Maximum Water Absorption 0.1% ASTM D 570 (Section 7.1, using entire component)



To: tonto who wrote (5338)7/7/2006 12:29:39 PM
From: yardslave  Read Replies (3) | Respond to of 12518
 
I did a google search on "plastic chair rebar". There are a lot of companies selling this stuff. Like you said PLNI doesn't have the corner on this market. If you go to the various vendors web sites they have prices and pictures and catalogs. Unlike PLNI.

Has anyone ever seen a PLNI catalog?


HomeMailHotSubjectMarksPeopleMarksKeepersSettings
Terms Of UseContact UsCopyright/IP PolicyPrivacy PolicyAbout UsFAQAdvertise on SI
© 2025 Knight Sac Media.  Data provided by Twelve Data, Alpha Vantage, and CityFALCON News