Silicon Investor (SI) -- The First Internet Community

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Gold/Mining/Energy : Gold and Silver Juniors, Mid-tiers and Producers -- Ignore unavailable to you. Want to Upgrade?

To: hubris33 who wrote (29140)	1/8/2007 8:51:56 PM
From: E. Charters	Read Replies (1) \| Respond to of 78424

All permits required except for bench scale tests. This would be bench scale at about 70-1000 lbs per hour. Similar electrically driven units in dredges since the 1930's ran at about 1 ton per hour. Perhaps with some tweaking a 4 X 6 unit could run at about double that, depending. For max lift according to the principles of McTaggart, we may have to add a coarse sand screen to the feed of about 20% that would be scalped and recirculated. We would use a small rubber tired hoe, take out about 10,000 lbs in a truck and recirc the sample at some other location. After wards we would dewater it back into the place we took it from with filtration with vacuum units. Vacuum would be an wooden air box with a compressor sucking air out the bottom with a expanded metal supported canvas. Same principle as a leaf filter device. EC<:-}