SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Gold/Mining/Energy : Mining News of Note -- Ignore unavailable to you. Want to Upgrade?


To: LoneClone who wrote (20725)6/2/2008 10:01:39 PM
From: LoneClone  Read Replies (1) | Respond to of 194619
 
Great Panther Extends High Grade Argentina Veins at the Topia Mine
Monday June 2, 4:49 pm ET

ca.us.biz.yahoo.com

VANCOUVER, BRITISH COLUMBIA--(MARKET WIRE)--Jun 2, 2008 -- GREAT PANTHER RESOURCES LIMITED (Toronto:GPR.TO - News) is pleased to announce that results of new surface drilling at the Company's 100% owned Topia Mine in Durango, Mexico have successfully confirmed the extension of high grade silver, gold, lead and zinc mineralization to approximately 100 meters below existing workings along a 600 metre strike length of the Argentina vein and in parallel hanging-wall (HW) and foot-wall (FW) veins. The veins remain open at depth and to the east of this drilled area.

Surface drilling on this zone was highlighted by hole ST07-068, which intersected 2,550g/t silver, 0.789g/t gold, 4.06% lead, and 7.08% zinc over 0.62 metres; and hole ST07-066, which intersected 826g/t silver, 0.1g/t gold, 2.84% lead, and 8.24% zinc over 0.85 metres in the main Argentina Vein and 671g/t silver, 0.22g/t gold, 1.79% lead, and 6.16% zinc over 0.40 meters in a foot-wall zone.

The drilling concentrated in open areas below Level 2, and west of and below Levels 3, 4, and 5 along the 600 metre strike length of the Argentina vein. The vein intersections showed consistently high base and precious metal values, and better than average widths of the main Argentina vein as well as hanging-wall or foot-wall parallel veins. This was very encouraging in light of the large, 100 meter by 600 meter, area of drilling. Of particular note is that the deeper holes such as ST08-069 have higher gold and copper values along with silver, lead and zinc, reflecting metal zoning typical of epithermal vein deposits (see Argentina vein longitudinal section on the Company web-site). For example, ST08-069, the most easterly hole of the recent drilling campaign intersected 788g/t silver, 7.21g/t gold, 11.3% lead, 0.92% zinc, and 2.48% copper over 0.84 metres. Further drilling will be conducted east of this, below old mine workings.

Multiple opportunities exist to access these deep intersections from existing workings. The ongoing rehabilitation of the Victoria Adit will provide access to the lowest Level 7 from where ramp access is planned to connect to the decline being driven from Level 2.

To end this phase of the surface drilling program, two core holes were drilled along the Cantarranas vein to explore an area below previous workings. Drill-hole ST08-074 intersected 139g/t silver, 0.45g/t gold, 1.4% lead, and 5.09% zinc over 0.57 metres. Surface drilling is scheduled to resume in October 2008 at the end of the rainy season.

Underground development and exploitation is presently taking place on eight mineralized vein structures on the Topia Mine property. This includes initial development along the Don Benito vein, continued development along the Recompensa, Argentina, Madre, Cantarranas, La Dura, and Animas veins and commencement of development along the San Gregorio vein. An independent mineral resource evaluation is presently being conducted for the mine by Wardrop Engineering of Vancouver, B.C.

Highlights of recent surface drilling:



---------------------------------------------------------------------------
True
Hole From To Width Width Ag Au Pb Zn Cu
Number (m) (m) (m) (m) Vein Name g/t g/t % % %
---------------------------------------------------------------------------

---------------------------------------------------------------------------
ST07-063 254.73 254.93 0.20 0.11 Argentina 505 0.43 2.01 0.12
HW
---------------------------------------------------------------------------
ST07-063 257.32 258.32 1.00 0.57 Argentina 194 0.18 1.10 0.33
Main
---------------------------------------------------------------------------
ST07-063 276.90 277.20 0.30 0.17 Argentina 335 0.09 0.51 0.17
FW 1
---------------------------------------------------------------------------
ST07-063 277.98 278.60 0.62 0.35 Argentina 286 0.04 0.15 0.03
FW 2
---------------------------------------------------------------------------

---------------------------------------------------------------------------
ST07-066 307.87 308.72 0.85 0.47 Argentina 826 0.10 2.84 8.24
Main
---------------------------------------------------------------------------
ST07-066 326.95 327.35 0.40 0.22 Argentina 671 0.22 1.79 6.16
FW 1
---------------------------------------------------------------------------

---------------------------------------------------------------------------
ST07-067 351.35 351.95 0.60 0.42 Argentina 452 2.17 2.39 1.28
Main
---------------------------------------------------------------------------

---------------------------------------------------------------------------
ST08-068 290.82 291.44 0.62 0.37 Argentina 2,550 0.79 4.06 7.08
Main
---------------------------------------------------------------------------

---------------------------------------------------------------------------
ST08-069 267.15 267.60 0.45 0.27 Argentina 117 0.11 0.02 0.02
HW
---------------------------------------------------------------------------
ST08-069 269.41 270.25 0.84 0.50 Argentina 788 7.21 11.30 0.92 2.48
Main
---------------------------------------------------------------------------

---------------------------------------------------------------------------
ST08-071 310.85 311.40 0.55 0.44 Argentina 418 1.48 4.27 0.42
Main
---------------------------------------------------------------------------
ST08-071 311.40 311.65 0.25 0.20 Argentina 22 0.07 3.96 0.13
Main
---------------------------------------------------------------------------
ST08-071 311.65 311.85 0.20 0.16 Argentina 1,220 2.07 9.86 0.87
Main
---------------------------------------------------------------------------

---------------------------------------------------------------------------
ST08-074 247.06 247.63 0.57 0.28 Cantarranas 139 0.45 1.4 5.09
---------------------------------------------------------------------------

Analysis of the drill core was performed by SGS Minerals Services, in their Durango, Mexico facilities. The Company's QA/QC program includes the regular insertion of blanks and standards into the sample shipments. Aspects of the Topia Mine relating to mining and metallurgy are overseen by Charles Brown, Chief Operating Officer for Great Panther and its wholly owned Mexican subsidiary, Minera Mexicana El Rosario, S.A. de C.V. (MMR). Robert F. Brown, P.Eng. and Vice-President of Exploration for Great Panther and MMR is designated as the Qualified Person for the Topia Mine Project under the meaning of NI 43-101, and has reviewed this news release.

ON BEHALF OF THE BOARD

Robert A. Archer, President & CEO

This news release contains forward-looking statements within the meaning of the United States Private Securities Litigation Reform Act of 1995 and forward-looking information within the meaning of the Securities Act (Ontario) (together, "forward-looking statements"). Such forward-looking statements may include but are not limited to the Company's plans for production at its Guanajuato and Topia Mines in Mexico, exploring its other properties in Mexico, the overall economic potential of its properties, the availability of adequate financing and involve known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements expressed or implied by such forward-looking statements to be materially different. Such factors include, among others, risks and uncertainties relating to potential political risks involving the Company's operations in a foreign jurisdiction, uncertainty of production and cost estimates and the potential for unexpected costs and expenses, physical risks inherent in mining operations, currency fluctuations, fluctuations in the price of silver, gold and base metals, completion of economic evaluations, changes in project parameters as plans continue to be refined, the inability or failure to obtain adequate financing on a timely basis, and other risks and uncertainties, including those described in the Company's Annual Report on Form 20-F for the year ended December 31, 2007 and reports on Form 6-K filed with the Securities and Exchange Commission and available at www.sec.gov and Material Change Reports filed with the Canadian Securities Administrators and available at www.sedar.com.

SEC 20-F Statement Filed; Standard & Poor's Listed

Contact:

Contacts:
Great Panther Resources Limited
Brad Aelicks
(604) 685-6465

Great Panther Resources Limited
Don Mosher
(604) 685-6465
(604) 899-4303 (FAX)
Email: info@greatpanther.com
Website: greatpanther.com


Source: Great Panther Resources Limited