Passive Solar Design Overview - Part 4: Controls
Posted by Gail the Actuary on February 6, 2009 - 9:04am
This is another guest post by Will Stewart.
In Parts 1, 2, and 3 of this Passive Solar Design Overview series, we looked at the three main architectural styles of passive solar design (Direct Gain, Indirect Gain, and Isolated Gain), as well as the first three of the five design aspects, Aperture, Absorber, and Thermal Mass. This article will address the design aspect Controls at an overview level. All of these aspects are important regardless of whether a new building is being designed or renovation of a current building is being considered.
Figure 15 - Passive Solar Design Aspects
In passive solar design, the term controls stands for those aspects of the design that inhibit solar heat gain during non-heating seasons without precluding its desired collection during winter. These design components include overhangs (fixed, removable, louvered), light shelves, blinds, exterior louvers, awnings, landscape shading (deciduous trees or vines), etc. It also refers to quasi-active measures such as opening windows and raising/lowering insulating shades.
Sun Position
The first step in designing a solar shading control is to determine the seasonal sun angles at the building's location.
Figure 16 - An example of the Sun's inclination difference by season
You can obtain this information from a number of sites online (need to determine your latitude and longitude? Find it at WeatherUnderground after you enter your location) ;
SolarPlots.info (US only, from TOD reader dallastx)
SunPosition.info
SunAngle
Overhangs
The most common controls include fixed roofline or pente eaves, louvered overhangs, and vegetative support structures (e.g, pergolas). In the winter, the sun's inclination is low in the sky, providing desired warmth; in the summer, the sun is (relatively) high in the sky at noon (see figure 13). Overhangs will help to block the direct insolation of the summer sun, though will not reduce ground reflection or the majority of diffuse sky radiation.
Note that there are many different types of overhangs:
Fixed: Stays in place year around
Removable: Removed during heating season
Louvered: Blocks summer insolation, allowing most winter insolation through
Vegetative: Supports deciduous foliage during growing season to block summer sun
Daylighting shelves: While some are primarily interior, others are dual purpose, using an overhang to help capture more light
Figure 17 - Overhang considerations
Figure 18 - Renovation addition of pente eave over 1st floor to reduce summer solar gain
Figure 19 - Balconies and PV arrays can be overhangs
Figure 20 - Simple louvered overhang
Figure 21 - Seasonal retractable overhangs
Figure 22 - Multi-story louvered overhangs
Figure 23 - Movable PV array overhangs (winter and summer configurations)
Three of the main criteria in fixed overhang design are;
Window height
Overhang extension length
Offset of the overhang above the window
Some simple rules of thumb from the US DoE include (HDD and CDD data is available from local weather services);
Cold climates: above 6,000 heating degree days (HDD)* (at base 65°F [18°C])
Locate shadow line at mid-window using the June 21 (summer solstice) sun angle.
Moderate climates: below 6,000 heating degree days (HDD)* (at base 65°F [18°C]) and below 2,600 cooling degree days (CDD)* (at base 75°F [22°C])
Locate shadow line at window sill using the June 21 (summer solstice) sun angle.
Hot climates: above 2,600 cooling degree days (CDD)* (base 75°F [22°C])
Locate shadow line at window sill using the March 21 (vernal equinox) sun angle.
One quick way to gauge the design of an overhang is to model it. We can use an online overhang modeling program to trial various configurations of
Fins
Fins complement overhangs by using vertical surfaces to block undesirable solar insolation on the East and West side of equatorial-facing windows.
Figure 24 - Fins combined with overhangs
Daylighting
Passive solar controls can be designed to enable daylighting, which is the use of natural light in a manner that reduces the energy required for artificial lighting. Overhangs can be combined with light shelf techniques to capture light above the overhang to reflect into the building space along the ceiling.
Figure 25 - Overhangs doubling as light shelves Figure 26 - Light distribution from light shelves
External Shade Control
Another way to keep the sun out during non-heating seasons is to place external blinds on the outside, a technique that may sound bizarre to some until one realizes that most old-fashion shutters were louvered to provide external shading in the summer while also allowing natural ventilation and daylighting. These remain a viable way to accomplish all three, though are not as easy to find these days in their traditional configurations. Note that external shades, unlike most overhangs, have the added benefit of reducing diffuse and reflected solar radiation.
Figure 26 - Traditional shutters Figure 27 - Bahama shades
Figure 29 - Motorized external shades
Internal Shade Control
Internal solar shading control fall into two broad categories; blinds and shades (or curtains). Most people are familiar with venetian blinds and typical decorative curtains. Both have the issue of the heat gain associated with sunlight entering the window, a portion reflecting off the surface, and then some portion re-exiting the window; hence, external measures are superior, though internal shades can be helpful in controlling diffuse and reflective radiation that an overhang does not. At each step, a portion of the sunlight is absorbed by these surfaces or reflected into the conditioned space. For more northerly locations, this may not be an issue, though for the rest it can result in less than desirable heat gain. Insulating shades will be covered in a energy efficiency article.
There are other shades that are intended to reject solar insolation; some with a full reflective block, and others block primarily UV, providing a daylighting effect. One must ensure that the blocking is primarily reflective, with as little absorption as possible (for summer heat control).
Figure 30 - Partially reflective shades
Figure 31 - White insulated shades reflect
most of the sun's energy while providing
additional r-value
Exercise
It's one thing to understand the basics, and another thing altogether to have 'hands-on' experience. To gain a better sense of how overhangs (and fins) can help prevent undesirable summer solar gain while still allowing winter solar heat gain, let's examine "what-if" designs at your location. Try many different combinations, and optimize for best winter exposure and most summer shading. You'll see that late summer is the biggest challenge (for those areas with hot summers). Below are two simple (and free) modeling tools to use to accomplish this;
Overhang Annual Analysis: Simple online overhang calculator from sustainable by design that shows the shading % by month for given window heights, overhang height (offset above window), and overhang depth.
Solar-2: A legacy Windows-95 program (part of a suite of building design tools from UCLA) that will accept simple building designs, focusing on equatorial-facing walls and windows, and other structures that can block solar insolation access. Enter your location, window sizes and placement, overhang and fin design information, and you will be able to see month by month hourly shading percentages and solar gains in BTUs. An animation of the solar insolation penetration of the building provides an interesting show for friends and family you want to educate.
One more passive solar design aspect article is next in the series (Distribution), with other articles on building energy efficieny renovations, passive solar renovations, case studies, and building energy design tool examples.
References:
1. David Kent Ballast, Architect's Handbook of Formulas, Tables, and Mathematical Calculations, Prentice Hall, 1988
2. Kissock, J, Internal Heat Gains and Design Heating & Cooling Loads, University of Dayton Lecture
3. Michael J. Crosbie, The Passive Solar Design and Construction Handbook, John Wiley and Sons, 1998
4. John Little, Randall Thomas, Design with Energy: The Conservation and Use of Energy in Buildings, Cambridge University Press, 1984
5. Passive Solar Heating and Cooling, Arizona Solar Center
6. Jeff Vail, Annualized Geo-Solar, JeffVail.net
7. K. Darkwa *, J.-S. Kim, Dynamics of energy storage in phase change drywall systems, Wiley, 2005
8 Jo Darkwa, Mathematical Modelling and Simulation of Phase Change Drywalls for Heating Application in a Passive Solar Building, AIAA, 2005
9. Warszawski, Abraham, Industrialized and Automated Building Systems, Taylor & Francis, 1999
10. US Department of Defense, Passive Solar Buildings, Unified Facilities Criteria, UFC 3-440-03N, 2004
11. F. Bruckmeyer, The Equivalent Brick Wall, Gesunheitsingenieur, 63(6), 1942, pg 61-65
12. J. Douglas Balcomb, Passive Solar Buildings, MIT Press, 1988
13. M. Hoffman, M. Feldman, Calculation of the Thermal Responses of Buildings by the Total Time Constant Method, Building and Environment, Vol 16, No. 2, pg 71-85, 1981
14. Givoni, Baruch, Climate Considerations in Building and Urban Design, John Wiley and Sons, 1998 pg. 115-147
15. Høseggen, Rasmus, Dynamic use of the building structure - energy performance and thermal environment, Norwegian University of Science and Technology, 2008
16. Bruce Haglund, Kurt Rathmann, Thermal Mass in Solar and Energy-Conserving Buildings (.pdf), University of Idaho
theoildrum.com |
