Silicon Investor (SI) -- The First Internet Community

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Technology Stocks : Cyrix 1 / NSM 1 where hardware goes -- Ignore unavailable to you. Want to Upgrade?

To: Investor A who wrote (100)	10/25/1997 5:25:00 PM
From: steve h	Read Replies (1) \| Respond to of 300

Fuchi and Kyle, re:>>The brown slot in the middle of the board is the AGP slot.<< I'm concerned about clearance of the AGP slot since there is a toroidal coil near the end that faces the back. I assume that the edge card connector is taller than the coil and there are no clearance issues. I also assume that an AGP slot is set up like a PCI or ISA slot. i.e., connections for peripherals come out the back like PCI video cards. As you can see, I'm not a PC expert. please let me know if these assumptions are correct! It's hard to tell from the picture. Also, does the via vp3 chipset support ultra dma? the epox tech descriptions don't mention it. thanks again, steve h p.s. i'm more confused than ever. here's another motherboard i would like to experiment with! So little money and so many MBs.