SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Pastimes : Clown-Free Zone... sorry, no clowns allowed -- Ignore unavailable to you. Want to Upgrade?

To: Roads End who wrote (390918)7/23/2009 10:19:07 PM
From: Box-By-The-Riviera™1 Recommendation  Respond to of 436258
 
well, we got a green tag today. yikes!!!!!!!!!!!!!!!!!!

in gas piping joint connection under pressure and holding is the key............ my bitch was up to 12 lbs for 48 hours, with only 7 lbs required.

as to the galvi, i'll either be dead, or living elsewhere before the pipe rusts out and the world ends.

though i get your point............ completely.



To: Roads End who wrote (390918)7/24/2009 8:25:53 AM
From: broadstbull  Read Replies (1) | Respond to of 436258
 
This has always been my understanding...I ran mine myself...if you can rent/borrow a cutter/threader machine it's an easy job. Also there is a special mixable pipe dope you use to seal the threads.... when using black pipe for gas.


HomeMailHotSubjectMarksPeopleMarksKeepersSettings
Terms Of UseContact UsCopyright/IP PolicyPrivacy PolicyAbout UsFAQAdvertise on SI
© 2025 Knight Sac Media.  Data provided by Twelve Data, Alpha Vantage, and CityFALCON News