Silicon Investor (SI) -- The First Internet Community

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Pastimes : Plastics to Oil - Pyrolysis and Secret Catalysts and Alterna -- Ignore unavailable to you. Want to Upgrade?

To: scion who wrote (813)	5/27/2010 1:40:10 PM
From: scion	Read Replies (1) \| Respond to of 53574

Region 9 Program Contact Information dec.ny.gov 270 Michigan Ave. Buffalo NY 14203-2915 region9@gw.dec.state.ny.us Allegany, Chautauqua, Cattaraugus, Erie, Niagara and Wyoming counties Program Phone Number Fax Number Regional Director Abby Snyder (716)851-7200 (716)851-7211 Administration (716) 851-7201 Buffalo (716) 665-6111 Falconer (716) 372-0645 Allegany (585) 268-5392 Belmont region9 Air Quality (716) 851-7130 (716) 851-7134 Email region9@gw.dec.state.ny.us dec.ny.gov

To: scion who wrote (813)	5/27/2010 8:18:11 PM
From: SteveF	Read Replies (2) \| Respond to of 53574

I'm willing to bet that Islechem has never tested the big production processor (until now) and that the report they let JBII file in the "P2O Validation" 8K shows data that couldn't have been gathered without the same tests. They also didn't have the "P2O Production Facility". The PR gives it away: IsleChem's results confirmed the Company's results. Furthermore, the process is proven to be scalable to 20 T or larger processors and promises to be free of any harmful emissions or toxic residues, and a high positive energy balance, thus maintaining compliance with the “green” efforts of JBI. sec.gov That tells me they hadn't scaled it up to 20T at that point. The Islechem "Report" makes no mention of which machine they actually tested. I bet it was the modified Blest that achieved those numbers. JBI, Inc retained IsleChem in Dec 2009 to analyze their plastic to oil solution and assist with preparing documentation required for state permits. We modified JBI's P2O processor to collect data from sensors, residue, and off gas for analysis. After more than 40 small scale runs of various multicolored mixed plastic feedstocks through the process, and after analyzing the energy consumption, residue, off-gas, and material balance in the process, we have determined: · JBI's P2O solution is repeatable and scalable. · Approximately 85-90% of the hydrocarbon composition in the feedstock is converted into a “near diesel” fuel. · Approximately 8% of the hydrocarbon composition in the feedstock is converted to a usable off gas much like natural gas. · Approximately 1% of the feedstock remains in the processor as a residue. · This analyzed residue contains various metals from coloring agents and other plastic additives that were originally in the feedstock plastic and a small amount of carbon. · The fuel product was analyzed with a gas chromatograph and the chromatogram is similar in many respects to diesel fuel. · The fuel product viscosity is approximately 2 cst @ 40 degrees C, and is an amber fuel. · The fuel product contains only trace amounts of sulphur. · The fuel product centane number exceeds 40. · The residue does not appear to contain any highly toxic or difficult to dispose of components. · There is no evidence of air toxins in the emissions. · The energy balance of the process is positive; that is, more energy value is produced than is consumed by the process. Early data suggests that it is by as much as a factor of two. Dale R. Kunze Vice President, Operations IsleChem, LLC IsleChem, LLC 2801 Long Road Grand Island, NY 14072 (716) 773-8100 (800) 699-8606 sec.gov