Silicon Investor (SI) -- The First Internet Community

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Pastimes : Plastics to Oil - Pyrolysis and Secret Catalysts and Alterna -- Ignore unavailable to you. Want to Upgrade?

To: scion who wrote (2153)	9/8/2010 4:07:12 PM
From: fortitude	Read Replies (2) \| Respond to of 53574

i smell another pipe coming..:)

To: scion who wrote (2153)	9/8/2010 4:22:54 PM
From: SteveF	Read Replies (1) \| Respond to of 53574

Let's do the math. 250,000,000,000 pounds of feedstock is exactly enough to run 2500 P2O machines for 2500 days. I wonder if 4kids sees that pattern. I'm sure that's just a coincidence though....

To: scion who wrote (2153)	9/8/2010 6:08:48 PM
From: SteveF	Read Replies (1) \| Respond to of 53574

"As we began testing", recounts Bordynuik, "everyone's dream became a nightmare. What do we do if we produce too much natural gas? We were producing 4500 ft of excess natural gas per hour. So we built a gas compression system that puts the gas back into the furnace to feed the processor." In other words, Bordynuik found a technical fix so that the P2O processor now uses the natural gas to power itself. That's pure brilliance right there. Only a genius could have implemented such a unique solution... ...except that's exactly the opposite of what JBII reported to shareholders and the SEC in the restated 10K/A. Was Honest John lying in the 10K/A or to the reporter? A minor by-product of the process is an off-gas much like natural gas. The process consumes much less off-gas to operate than is generated when operating at maximum capacity. Further testing at high processing rates proved that all the off-gas could not be burned (temporarily for a stack test) in the process furnace. Flaring the excess off-gas is common in the oil and gas industry but is not environmentally friendly, would waste the fuel value, and would require a separate permit. To avoid flaring the excess gas, the Company purchased a gas compression system to buffer and regulate the off-gas to 1) resell or 2) to cold start the process. The gas compression system and mobile storage tanks were installed on the Company’s 20T Plastic2Oil processor in June, 2010. The gas compression was successfully interfaced to the Company's 20T processor. The 20T processor is presently being operated in steady-state conditions to gather data for an air permit. sec.gov