Silicon Investor (SI) -- The First Internet Community

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Pastimes : Plastics to Oil - Pyrolysis and Secret Catalysts and Alterna -- Ignore unavailable to you. Want to Upgrade?

To: donpat who wrote (2422)	9/28/2010 7:44:35 PM
From: scion	Read Replies (2) \| Respond to of 53574

From Biomass to Chemicals in One Step A startup's catalytic process converts biomass directly into components of gasoline. By Katherine Bourzac Monday, March 29, 2010 technologyreview.com An early-stage company spun out of the University of Massachusetts, Amherst, plans to commercialize a catalytic process for converting cellulosic biomass into five of the chemicals found in gasoline. These chemicals are also used to make industrial polymers and solvents. Anellotech, which is seeking venture funding, plans to build a pilot plant next year. Anellotech's reactors perform a process called "catalytic pyrolysis," which converts three of the structural molecules found in plants--two forms of cellulose and the woody molecule lignin--into fuels. Ground-up biomass is fed into a high-temperature reactor and blended with a catalyst. The heat causes the cellulose, lignin, and other molecules in the biomass to chemically decompose through a process called pyrolysis; a catalyst helps control the chemical reactions, turning cellulose and lignin into a mix of carbon-ring-based molecules: benzene, toluene, and xylenes. The global market for this group of chemicals is $80 billion a year and growing at a rate of 4 percent a year, says Anellotech CEO David Sudolsky. "We're targeting to compete with oil priced at $60 a barrel, assuming no tax credits or subsidies," he says. The company's founder, George Huber, says his catalytic pyrolysis process can create 50 gallons of the chemicals per metric ton of wood or other biomass, with a yield of 40 percent. The other products of the reaction include coke, used to fuel the reactor. "The advantage of pyrolysis is that it uses whole biomass," says John Regalbuto, an advisor to the Catalysis and Biocatalysis Program at the National Science Foundation. On average, lignin accounts for 40 percent of the energy stored in whole biomass. But because it can't be converted into sugars the way cellulose can, lignin can't be used as a feedstock for fermentation processes such as those used by some biofuels companies to convert sugarcane into fuels. Pyrolysis is also different from gasification, another process for using whole biomass. Gasification results in a mixture of carbon and hydrogen called syngas, which can then be used to make fuel. Pyrolysis, by contrast, turns biomass into liquid fuels in a single step. And while gasification can only be done economically at a very large scale, says Regalbuto, catalytic pyrolysis could be done at smaller refineries distributed near the supply of biomass. Pyrolysis is an efficient way to use biomass, but it's difficult to control the products of the reaction, and it's difficult to get high yields. The keys to Anellotech's process, says Huber, are a specially tailored catalyst and a reactor that allows good control over reaction conditions. Huber's group at UMass, where he is a professor of chemical engineering, was the first to develop a catalytic process for converting biomass directly into gasoline, and Anellotech's processes are based on this work. technologyreview.com