SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Pastimes : Computer Learning -- Ignore unavailable to you. Want to Upgrade?


To: vireya who wrote (75496)5/30/2011 9:04:04 PM
From: stock bull  Respond to of 110581
 
Regarding the problem with the external drive. If the software is corrupted you can reformat the drive and it should be fine. However, if the heads have crashed into the platters, or the drive sustained physical damage, or the controller on the drive failed, then you need a new drive. So, try reformatting the drive. However, keep in mind that all data on the drive will be lost.

If your are having trouble in using your new drive, make sure that you followed the installation instructions. You must have the correct drivers installed, and these should be included with the drive's installation CD. If all else fails, you should be able to call the drive's tech support.

As far as using Acronis, I would dump them. I uninstalled Acronis as I thought it was a very unstable, and bloated program. I installed Easeus, home edition upgraded to professional 2.5. Works great and is stable.

Let me know how the above works for you.

Stock Bull



To: vireya who wrote (75496)5/30/2011 9:12:28 PM
From: stock bull  Respond to of 110581
 
I forgot to tell you that the Easeus Imaging Program is free for the basic version. The upgrade is 29.95, however, if you write a review for it the upgrade is also free. Instructions for the free upgrade are on Easeus's website. If you go this route, let me know and I'll assist you with the free upgrade.

Stock Bull



To: vireya who wrote (75496)5/30/2011 10:01:55 PM
From: Cheeky Kid  Respond to of 110581
 
If you are getting errors on a back up drive, get a new one. I would not trust a back up drive with errors. But thats me. Some new drives require you to plug in two USB cables if your USB ports do not produce enough power. Some USB drives come with a cable with 2 USB connectors, one for power and one for data.

If you plug the USB drive in the back of the computer, those USB ports put out the right amount of voltage. Front ones don't always put out enough power and your computer won't see the drive.

There is nothing wrong with Acronis, I just restored an image on my Windows 7 machine, I had some software on there that was causing problems, and I wanted it off, so I restored an image I took before I installed that software.

True Image is a good imaging program. I use 2010 on my Windows XP machine, and 2011 on my Windows 7 machine.

I just bought a new external USB drive, I bought a Iomega eGo drive. But I prefer my Seagate USB drives. Have to get use to this new one.



To: vireya who wrote (75496)5/31/2011 9:16:59 AM
From: PMS Witch  Read Replies (3) | Respond to of 110581
 
When I install new drives, my system doesn't "see" them until I initialize them.

Open a Command Prompt window as Administrator.

Enter the command DiskMgmt.MSC

Scroll down to the new disk.

Right-Click the disk's icon (On the left) and select Initialize. A wizard will open and guide you. Format and assign a drive letter.

Cheers, PW.