Silicon Investor (SI) -- The First Internet Community

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Politics : Formerly About Advanced Micro Devices -- Ignore unavailable to you. Want to Upgrade?

To: tejek who wrote (633514)	10/28/2011 2:25:21 AM
From: bentway	Read Replies (1) \| Respond to of 1578962

FREQUENTLY ASKED QUESTIONS BAR’S LEAKS POWER STEERING FLUID W/STOP LEAK P/N 1610 Click for PDF Version *http://www.barsproducts.com/bars_faq.htm* *My reservoir is not very low, can I just top of the system with Bar’s Leaks® Power Steering Fluid With Stop Leak?* If you have a very minor leak, you may not be able to add the entire bottle. The product works great for topping off the power steering fluid level any time you need to add fluid. *Does Bar’s Leaks® Power Steering Fluid With Stop Leak work in all types of power steering fluids?* Yes, Bar’s Leaks is one of the only power steering fluid with stop leak products that is compatible with all ATF, petroleum based, mineral oil and synthetic fluids. This includes all domestic, import and heavy duty power steering applications. *How does Bars Leaks® Power Steering Fluid With Stop Leak work?* After time, power steering seals tend to dry out and shrink. Bar’s Leaks® Power Steering Fluid With Stop Leak revitalizes these seals and makes them soft and pliable again. *How much do I install?* Our p/n 1610 (12 oz.) is designed for one bottle to be installed in a passenger car or light truck. One bottle treats two to three quarts of fluid. Do not overfill. *I don’t have a leak, can I use Bar’s Leaks® Power Steering Fluid With Stop Leak in my vehicle to prevent future leaks?* Yes, this is an excellent product to be used at any time to protect against future leaks. *How long does it take to start working?* Bar’s Leaks starts working the minute you install and start driving the vehicle. You will usually see results in about 150 miles or three (3) days of driving. *Will Bar’s Leaks® Power Steering Fluid With Stop Leak help my noisy power steering pump?* Yes, by filling the power steering reservoir to the proper level it will keep the system quiet. *If I install more than the required amount, will it work faster or better?* No, we have formulated our product to work best at the suggested dosage amount. *Will I damage my system if I drive without fluid in my power steering?* Yes, usually damage to your power steering pump will happen within relatively few miles if you continue to drive with little or no fluid in your power steering reservoir. *What causes power steering leaks?* The most common cause of power steering system leaks is age and/or high mileage. After time, power steering seals and o-rings tend to dry out and shrink causing leaks. Bar’s Leaks® Power Steering Fluid With Stop Leak works to revitalizes these seals and makes them soft and pliable again. *What are the symptoms of a power steering leak?* Depending on the severity of the leak the first thing you may notice is spotting, where you will find fluid spots located on the driveway or garage floor. While looking under the vehicle around the area where the rack & pinion or gearbox is located; or the front of the engine where the belt is located, you will find fluid dripping. The next thing that happens is the steering wheel becomes harder to turn or does not turn smoothly. This is usually accompanied by a squealing or grinding noise when turning the wheel.