SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Strategies & Market Trends : TA-HARD & SOFTWARE -- Ignore unavailable to you. Want to Upgrade?


To: Sean W. Smith who wrote (114)11/25/1997 11:41:00 AM
From: Howard R. Hansen  Read Replies (1) | Respond to of 163
 
"Therefore I recommend buying 2 10BaseT ethernet cards and 1 crossover cable 2x25$ + 10$ for a cable to provide this connectivity. Easier to setup, faster, and your not wasting your parallel ports...."

What additional software is required to implement this low cost ethernet connection you recommend? Or is there adequate support built into Windows/95 to implement this low cost ethernet connection without buying additional software?

Thanks in advance. H.R. Hansen



To: Sean W. Smith who wrote (114)11/25/1997 2:23:00 PM
From: Derek B  Read Replies (1) | Respond to of 163
 
One additional word on flexibility regarding:
Therefore I recommend buying 2 10BaseT ethernet cards and 1 crossover cable 2x25$ + 10$ for a cableto provide this connectivity.

I recommend a combination ethernet card - one that can accept either 10BaseT or coaxial cable. With the coax cable you can daisy-chain together several computers without need for a hub or special software. I have 4 computers so networked and nothing more than Win95 for software. Works great.

If you only need 2 computers networked, Sean's recommendation is good. Make sure to buy the special cable, however, for this functionality. Once you reach 3 or more networked 10BaseT computers, you'll need a hub.

Some excellent advice on configuring Win95 software for networking can be found at windows95.com

Derek