SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Pastimes : Computer Learning -- Ignore unavailable to you. Want to Upgrade?

To: Reseller Mike who wrote (89106)6/6/2015 1:54:56 PM
From: goldworldnet  Respond to of 110626
 
My only experience with paper tape was operating a photo repeater to generate step and repeat photomasks. Also operated an E-Beam for writing reticles in the 1980 timeframe. That machine used 12" computer tape. E-Beam reticles were typically 10x and the photo repeater would use that to make a 1x master. I got into design later, but I still knew a lot of people with photomask that I would submit data to and understood what they were doing.



* * *



To: Reseller Mike who wrote (89106)6/6/2015 1:56:02 PM
From: greg s1 Recommendation

Recommended By
goldworldnet

  Read Replies (2) | Respond to of 110626
 
We loaded targets into the Missile Guidance Alignment Checkout Group with punched tape for the Titan II ICBM (circa 1963 technology):



HomeMailHotSubjectMarksPeopleMarksKeepersSettings
Terms Of UseContact UsCopyright/IP PolicyPrivacy PolicyAbout UsFAQAdvertise on SI
© 2026 Knight Sac Media.  Data provided by Twelve Data, Alpha Vantage, and CityFALCON News