Silicon Investor (SI) -- The First Internet Community

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Politics : Formerly About Advanced Micro Devices -- Ignore unavailable to you. Want to Upgrade?

To: Bill Jackson who wrote (27052)	12/22/1997 11:54:00 AM
From: greg nus	Read Replies (1) \| Respond to of 1574200

Bill Maxwell, Here is the company that sell the diamond coating material. EDIX, They also make flat panel displays and high density Srams, dram chips for use at hightemp/lowthemp extremes.

To: Bill Jackson who wrote (27052)	12/22/1997 1:25:00 PM
From: Petz	Read Replies (1) \| Respond to of 1574200

Bill, Maxwell, re:overclocking limits On the K6, I don't think cooling to ambient temperature will get you beyond about 266 MHz. Why? The device is switching speed limited, not heat limited. If you could apply more than 3.5 volts, it would have a high enough current flow in its gates to go beyond 266 MHz, but unfortunately I think the transistors will break down beyond 3.5 volts. It may be that the real breakdown point is 3.6 or 3.7, but you're definitely playing with fire here. I've read about over-voltaging the classic Pentiums to up to 5 volts. Apparently supercooling (way below ambient) speeds up the switching speeds. If you take one of the new 266 MHz chips (not quite available yet), designed to run at 2.1 volts, you should be able to up its voltage considerably more before breakdown levels. Petz