Silicon Investor (SI) -- The First Internet Community

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Pastimes : Computer Learning -- Ignore unavailable to you. Want to Upgrade?

To: goldworldnet who wrote (94429)	9/18/2016 11:52:27 AM
From: Eric L	3 Recommendations Recommended By goldworldnet Gottfried Zen Dollar Round Respond to of 110624

USB 3.0 Type A host to USB 3.0/2.0 Micro-B port Connector Cables ... [The most common standard non-proprietary other end for powering external drives, smartphones and other devices] The supplied basic cables shipped with many external drives are generally short, usually somewhat flimsy, and don't have gold-plated connectors. This can potentially cause performance problems particularly on USB 3.0 connections from computers (particularly on some laptops) to an external drive if power output to the device is sub-optimal which can be the case. I don't use basic cables on any of my A/V kit and don't on connections to external drives even though my external drives all seem to perform perfectly well with the basic short cables supplied even if plugged into an external hub (which is not recommended) . I use the $5.50 'Amazon Basics' cable on the left below on my 6th generation WD My Passport Ultra and the $9 TNP cable on the right with gold-plated connectors, pure Oxygen-Free copper lines with bare copper conductors and foil & braid shielding on my 7th generation My Passport Ultra and 7400 RPM HGST Touro S. All 3 are 3 ft length instead of the 1' to 1 ½' length basic cables supplied by Western Digital ... - Eric L -