SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Pastimes : Computer Learning -- Ignore unavailable to you. Want to Upgrade?


To: Sweet Ol who wrote (95358)1/6/2017 11:30:48 AM
From: Thomas A Watson  Read Replies (1) | Respond to of 110623
 
as far as I know there is only one form factor for all laptops. lets say post 2000.

most current laptops have a bios that have no restriction on size in bytes

cloning is fair;y no brain with acronis. one or a few screws to open laptop.

i choose 256 GB for desktop and laptops. size, price, function. I will use again in any system upgrade.

For mass storage on my local network I use WD Clouds 4 and 6 TB.

perceived speed increase seemed 5 to 10 to one on start and ap starts. I was very happy.

Crucial_CT256MX100SSD1 [Hard drive] (256.06 GB) was chosen many months ago. At time it seemed the value.



To: Sweet Ol who wrote (95358)1/6/2017 12:12:09 PM
From: FJB1 Recommendation

Recommended By
goldworldnet

  Read Replies (1) | Respond to of 110623
 
If you have a SATA 3 interface it is very easy and you will see unbelievable performance gains. You can use the scanning tool here to check your system specs.

crucial.com



To: Sweet Ol who wrote (95358)1/6/2017 5:53:39 PM
From: PMS Witch2 Recommendations

Recommended By
goldworldnet
Gottfried

  Read Replies (1) | Respond to of 110623
 
It's fairly easy to do the mechanical part of changing the disk, but some laptops are easier than others. I've done two. One, an old Dell Latitute simply involved removing two screws and the drive would slide out. With my newer Dell Latitude I had to remove the bottom panel's four screws, and then remove the disk carrying tray (more screws.) Once the tray was out, removing the disk from the tray was another four screws.

There are a ton of YouTube videos showing the job being done for a wide variety of machines. Watch a few until you feel you can do the job in your sleep.

Hint: Get yourself a set of tiny screwdrivers that fit the screws you'll be working with. It will make the job much easier.

Don't forget to disconnect the power and remove the battery. Be careful with static electricity. If everything goes awry, the job will take five minutes. If things go smoothly, you'll be done in a jiffy.

When people mention performance improvements with their SSD, almost everyone considers speed. Yes, the speed bonus is noticeable and dramatic -- especially if your system has SATA III and you've configured your BIOS to use AHCI. (Advanced Host Controller Interface) But there's a couple of additional benefits: Battery life and silence. SSD's require much less power; hence, longer battery life. As well, less heat is generated. (And many systems "slow down" when warm.) What I really love is the silence. I can hear magnetic disks spinning and after a while the sound annoys me. With the SSD, I can work in peace.

Hope this helps.

Cheers, PW.

P.S. Latitude D630 & Latitude E5420.

P.P.S. Grab one of those many disk performance evaluating programs and run it on your magnetic disk before you do the swap. Then use it to evaluate your SSD. It's eye-opening!

crystalmark.info

atto.com