SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Politics : Formerly About Advanced Micro Devices -- Ignore unavailable to you. Want to Upgrade?

To: longnshort who wrote (1202164)2/17/2020 7:27:00 PM
From: d[-_-]b  Read Replies (3) | Respond to of 1575622
 
the article says one 18 ft of re bar to build a 30 ft ladder


Not even addressing that obvious lie - rebar is like a wet noodle and the "ladder" rails would fold over.
At a minimum you'd need square tubing for the rails - the rungs could be rebar.



To: longnshort who wrote (1202164)2/18/2020 10:35:32 AM
From: Bill1 Recommendation

Recommended By
longnshort

  Respond to of 1575622
 
You'd need about 100 feet of rebar to build a 30 foot ladder. That includes the sides and rungs. These libtards sure are tards.


HomeMailHotSubjectMarksPeopleMarksKeepersSettings
Terms Of UseContact UsCopyright/IP PolicyPrivacy PolicyAbout UsFAQAdvertise on SI
© 2025 Knight Sac Media.  Data provided by Twelve Data, Alpha Vantage, and CityFALCON News