Silicon Investor (SI) -- The First Internet Community

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Technology Stocks : C-Cube -- Ignore unavailable to you. Want to Upgrade?

To: Ian deSouza who wrote (28838)	1/27/1998 5:18:00 PM
From: DiViT	Read Replies (1) \| Respond to of 50808

Since your looking, try this... developer.intel.com developer.intel.com 2.6.5 MPEG-2 Video Decode MPEG-2 video decode is recommended to handle encoded video streams for DVD-based applications. The decoder may reside on the DVD controller card, or graphics card, or motherboard. Higher-MHz systems may even decode MPEG-2 in software alone. The MPEG-2 decoder should meet the following requirements: Must comply to industry standard MPEG-1 and MPEG-2 Must support throughput rates of 15 Mb/s at 720x480 resolution with 4:3 and 16:9 aspect ratios 30 fps video rate, 24 fps film rate Synchronization between audio and video streams Sub-picture and navigation support Balanced CPU utilization to allow additional processor-tasking applications to behave in an acceptable fashion during concurrent use. This one even calls out a Hardware MPEG-2 decoder under the feature summary... developer.intel.com Graphics Options: TV output (NTSC/PAL S-Video) option as required to connect to large monitors MPEG-2 decoder HW Video Capture Multiple monitor support