SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Gold/Mining/Energy : Mining News of Note -- Ignore unavailable to you. Want to Upgrade?


To: LoneClone who wrote (148876)1/6/2021 11:17:13 AM
From: LoneClone  Read Replies (1) | Respond to of 192834
 
Osisko Mining Windfall Infill Drilling: Still Good

New Intercepts Include 206 g/t Au over 2.0 Metres

ca.finance.yahoo.com

Osisko Mining Inc.
Wed., January 6, 2021, 5:00 a.m. PST·21 min read

TORONTO, Jan. 06, 2021 (GLOBE NEWSWIRE) -- Osisko Mining Inc. (OSK:TSX. "Osisko" or the "Corporation") is pleased to provide new analytical results from the ongoing expansion and definition drill program at its 100% owned Windfall gold project located in the Abitibi greenstone belt, Urban Township, Eeyou Istchee James Bay, Québec.

Drilling is currently focused on the Lynx deposit, with the near-term objective of completion of the infill program in preparation for feasibility work. Osisko Chief Executive Officer John Burzynski commented: “We anticipate a busy year ahead as we maintain the steady drill pace of 2020 and work towards the completion of infilling our resource. The principal mineralized zones also remain open down plunge, and near deposit exploration is continuing to give encouraging results, which we believe will lead to new mineralized extensions and additions.”

The table below contains resource definition infill intercepts located inside the February 2020 mineral resource estimate wireframes (see Osisko news release dated February 19, 2020). Significant new analytical results are presented below and include 90 intercepts in 25 drill holes and 23 wedges.

Selected high-grade intercepts from the new results include: 206 g/t Au over 2.0 metres in WST-20-0581; 60.0 g/t Au over 2.0 metres in WST-20-0498; 52.9 g/t Au over 2.8 metres in WST-20-0513; 47.5 g/t Au over 2.2 metres in OSK-W-20-2334; 42.4 g/t Au over 2.3 metres in WST-20-0523A; 40.4 g/t Au over 3.6 metres in OSK-W-20-2133-W4. Maps showing hole locations and full analytical results are available at www.osiskomining.com.

Hole No.

From
(m)


To
(m)


Interval
(m)


Au (g/t)
uncut


Au (g/t)
cut to 100 g/t

Zone

Corridor

OSK-W-20-2133-W4

798.8

802.4

3.6

40.4


Triple Lynx

Triple Lynx

including

799.2

800.2

1.0

73.3


OSK-W-20-2243-W6

804.7

806.8

2.1

9.02


Lynx_361

Triple Lynx


851.4

854.8

3.4

23.5


Triple Lynx

Triple Lynx

including

853.1

853.9

0.8

68.9


OSK-W-20-2252-W7

842.6

849.0

6.4

6.93


Triple Lynx

Triple Lynx

including

844.8

845.1

0.3

41.7



879.1

881.8

2.7

4.62


Lynx_371

Triple Lynx

including

879.4

879.7

0.3

16.0



885.0

889.0

4.0

4.70


Lynx_371

Triple Lynx


893.9

896.7

2.8

5.67


Lynx_371

Triple Lynx


919.7

923.0

3.3

4.45


Lynx_361

Triple Lynx

including

919.7

920.0

0.3

13.3


OSK-W-20-2256-W4

1012.0

1014.0

2.0

14.6


Triple Lynx

Triple Lynx

OSK-W-20-2256-W6

868.8

872.6

3.8

24.4


Lynx_371

Triple Lynx

including

869.7

870.3

0.6

79.5



875.0

879.0

4.0

4.91


Lynx_371

Triple Lynx


883.0

892.0

9.0

18.2


Lynx_361

Triple Lynx

including

887.6

888.3

0.7

57.6


OSK-W-20-2256-W7

869.4

872.0

2.6

4.86


Lynx_361

Triple Lynx


899.0

901.0

2.0

15.4


Triple Lynx

Triple Lynx

including

899.6

900.0

0.4

69.4


OSK-W-20-2264

782.2

790.0

7.8

10.5


Lynx_330

Lynx

including

786.9

787.6

0.7

38.4


OSK-W-20-2271-W1

847.5

849.5

2.0

4.50


Lynx

Lynx

OSK-W-20-2271-W2

1024.5

1026.9

2.4

32.1


Lynx_330

Lynx

including

1026.6

1026.9

0.3

90.1



1064.0

1066.1

2.1

6.13


Lynx_334

Lynx

including

1065.2

1065.6

0.4

20.3



1077.0

1079.0

2.0

5.15


Lynx_334

Lynx

OSK-W-20-2275-W3

899.0

901.0

2.0

10.8


Triple Lynx

Triple Lynx

including

900.3

900.7

0.4

43.3


OSK-W-20-2275-W4

635.0

637.1

2.1

7.18


Lynx_365

Triple Lynx

including

636.1

636.5

0.4

25.6



804.8

810.4

5.6

11.8


Triple Lynx

Triple Lynx

including

806.3

806.9

0.6

55.1



835.0

837.0

2.0

11.1


Triple Lynx

Triple Lynx

including

835.6

836.0

0.4

54.7



889.5

892.0

2.5

5.40


Triple Lynx

Triple Lynx

including

890.4

891.0

0.6

22.4


OSK-W-20-2280-W2

1102.7

1105.0

2.3

5.46


Lynx_370

Triple Lynx

including

1103.5

1104.0

0.5

20.9


OSK-W-20-2280-W3

1099.2

1101.3

2.1

5.22


Triple Lynx

Triple Lynx

including

1101.0

1101.3

0.3

17.7



1103.0

1108.9

5.9

4.92


Triple Lynx

Triple Lynx

including

1108.6

1108.9

0.3

18.2



1112.9

1116.0

3.1

20.1


Lynx_370

Triple Lynx

including

1112.9

1113.5

0.6

77.8


OSK-W-20-2280-W4

1040.0

1042.0

2.0

6.32


Triple Lynx

Triple Lynx


1044.0

1046.0

2.0

4.83


Triple Lynx

Triple Lynx

including

1044.6

1044.9

0.3

24.6


Triple Lynx

Triple Lynx


1072.9

1077.5

4.6

12.8


Triple Lynx

Triple Lynx

including

1075.5

1075.9

0.4

97.2



1091.2

1098.0

6.8

3.96


Triple Lynx

Triple Lynx


1100.7

1105.0

4.3

13.5

12.7

Lynx_364

Triple Lynx

including

1100.7

1101.0

0.3

112

100


1109.7

1114.0

4.3

16.9

15.7

Lynx_364

Triple Lynx

including

1109.7

1110.0

0.3

117

100

OSK-W-20-2280-W5

1010.5

1016.0

5.5

3.61


Lynx_363

Triple Lynx


1039.0

1041.0

2.0

22.4


Lynx_364

Triple Lynx

including

1039.5

1040.0

0.5

81.8



1046.0

1052.0

6.0

30.4

23.7

Lynx_364

Triple Lynx

including

1047.8

1049.0

1.2

129

95


1054.0

1059.9

5.9

14.7


Lynx_364

Triple Lynx

including

1059.2

1059.9

0.7

82.8



1093.0

1096.0

3.0

12.0


Triple Lynx

Triple Lynx

OSK-W-20-2283-W1

807.0

809.6

2.6

8.20


Triple Lynx

Triple Lynx

including

807.5

809.6

2.1

9.02


OSK-W-20-2283-W2

814.8

817.1

2.3

8.16


Triple Lynx

Triple Lynx

including

816.6

817.1

0.5

26.8



832.7

835.0

2.3

6.13


Triple Lynx

Triple Lynx


991.0

993.0

2.0

9.11


Triple Lynx

Triple Lynx

including

991.3

991.8

0.5

35.7


OSK-W-20-2283-W6

831.6

836.0

4.4

17.6


Lynx_361

Triple Lynx

including

833.3

834.6

1.3

40.6


OSK-W-20-2292-W4

892.0

894.9

2.9

4.02


Lynx_375

Triple Lynx

including

893.1

893.8

0.7

10.3


OSK-W-20-2295-W2

679.7

682.0

2.3

24.7

17.4

Triple Lynx

Triple Lynx

including

681.7

682.0

0.3

157

100

OSK-W-20-2295-W3

660.3

662.3

2.0

3.89


Triple Lynx

Triple Lynx

OSK-W-20-2295-W4

670.1

673.1

3.0

5.99


Triple Lynx

Triple Lynx

including

670.1

670.6

0.5

16.6



698.0

700.1

2.1

4.33


Triple Lynx

Triple Lynx

including

699.8

700.1

0.3

23.7



757.0

759.3

2.3

4.08


Triple Lynx

Triple Lynx

including

757.0

757.5

0.5

10.1



822.5

824.5

2.0

3.90


Triple Lynx

Triple Lynx

including

823.5

824.0

0.5

14.1



841.0

843.0

2.0

5.77


Triple Lynx

Triple Lynx

including

841.4

841.7

0.3

31.5


OSK-W-20-2313-W5

819.9

822.0

2.1

7.49


Lynx_376

Triple Lynx

OSK-W-20-2322-W1

1119.8

1124.6

4.8

7.20


Lynx_330

Lynx

including

1120.5

1121.2

0.7

13.8


OSK-W-20-2334

1007.1

1009.3

2.2

47.5

41.7

Lynx_330

Lynx

including

1008.0

1008.4

0.4

132

100

OSK-W-20-2367

59.0

62.0

3.0

6.38


Lynx_335

Lynx SW

WST-20-0406

130.2

132.4

2.2

3.26


Lynx_322

Lynx

WST-20-0486

57.5

63.7

6.2

15.1


Lynx_303

Lynx

including

58.5

59.0

0.5

47.1


and

59.7

60.1

0.4

46.1



114.0

116.0

2.0

10.5


Lynx_304

Lynx

including

115.4

116.0

0.6

27.6


WST-20-0498

123.5

125.7

2.2

3.84


Lynx_304

Lynx


132.5

134.5

2.0

60.0

41.3

Lynx_304

Lynx

including

133.8

134.5

0.7

154

100

WST-20-0502

73.4

76.0

2.6

4.73


Lynx_311

Lynx

WST-20-0503

57.9

59.9

2.0

18.6


Lynx_311

Lynx

including

57.9

58.7

0.8

46.1


WST-20-0505A

84.5

87.0

2.5

9.07


Lynx_307

Lynx

including

84.5

84.8

0.3

72.4



233.5

236.0

2.5

3.00


Lynx SW

Lynx SW

WST-20-0506

123.2

125.5

2.3

7.83


Lynx_304

Lynx

including

123.9

124.7

0.8

22.4


WST-20-0509

94.4

96.5

2.1

4.24


Lynx_304

Lynx

including

94.4

94.7

0.3

13.9


WST-20-0512

48.2

50.2

2.0

8.84


Lynx_303

Lynx

including

49.3

49.9

0.6

29.1



54.0

56.0

2.0

21.1


Lynx_311

Lynx

including

54.9

55.4

0.5

83.8


WST-20-0513

138.0

140.8

2.8

52.9

44.5

Lynx_323

Lynx

including

139.0

139.9

0.9

126

100


151.8

154.0

2.2

3.67


Lynx_304

Lynx

WST-20-0514

141.0

143.0

2.0

20.9


Lynx_323

Lynx

including

141.0

142.0

1.0

32.5


WST-20-0523A

67.2

69.4

2.2

14.8


Lynx_311

Lynx

including

67.7

68.4

0.7

44.8



72.0

74.3

2.3

42.4


Lynx_311

Lynx

including

73.5

74.3

0.8

90.4


WST-20-0525

142.0

144.0

2.0

13.3


Lynx_323

Lynx

including

142.0

143.0

1.0

26.4


WST-20-0537

84.9

87.1

2.2

6.49


Lynx

Lynx

including

86.4

87.1

0.7

16.1


WST-20-0538

105.0

107.2

2.2

15.0


Lynx_304

Lynx

including

105.3

105.8

0.5

64.4



117.0

120.0

3.0

4.15


Lynx

Lynx

WST-20-0539

45.9

48.2

2.3

6.89


Lynx_303

Lynx


96.6

98.6

2.0

20.6


Lynx_304

Lynx

including

97.0

97.5

0.5

80.2


WST-20-0540

51.3

53.5

2.2

3.12


Lynx_303

Lynx


111.0

113.2

2.2

7.86


Lynx_304

Lynx

including

111.0

111.3

0.3

47.2


WST-20-0541

45.8

48.1

2.3

10.0


Lynx_303

Lynx

including

46.4

47.2

0.8

25.6



60.1

62.3

2.2

13.8


Lynx

Lynx

including

60.9

61.7

0.8

34.3



98.0

100.0

2.0

15.7


Lynx_304

Lynx

including

99.0

99.5

0.5

36.3


WST-20-0544

52.7

55.5

2.8

72.0

55.8

Lynx_303

Lynx

including

52.7

54.1

1.4

132

100

WST-20-0563

129.4

131.5

2.1

4.72


Lynx_365

Triple Lynx

including

129.4

130.0

0.6

15.1


WST-20-0579

58.0

60.5

2.5

5.62


Lynx_303

Lynx

WST-20-0581

268.4

274.0

5.6

4.56


Lynx SW

Lynx SW


283.0

285.0

2.0

206

45.4

Lynx SW

Lynx SW

including

283.0

283.9

0.9

458

100


Notes: True widths are estimated at 55 – 80% of the reported core length interval. See "Quality Control and Reporting Protocols" below.

Drill hole location

Hole Number

Azimuth
(°)


Dip
(°)


Length
(m)


UTM E

UTM N

Elevation

Section

OSK-W-20-2133-W4

118

-49

987

453080

5435531

417

3525

OSK-W-20-2243-W6

122

-54

965

453086

5435526

417

3550

OSK-W-20-2252-W7

129

-54

1191

453241

5435694

415

3750

OSK-W-20-2256-W4

125

-51

1122

453160

5435686

411

3675

OSK-W-20-2256-W6

125

-51

1157

453160

5435686

411

3675

OSK-W-20-2256-W7

125

-51

1005

453160

5435686

411

3675

OSK-W-20-2264

292

-74

1119

454127

5435062

396

4225

OSK-W-20-2271-W1

120

-53

1200

453462

5435683

410

3950

OSK-W-20-2271-W2

120

-53

1223

453462

5435683

410

3950

OSK-W-20-2275-W3

127

-49

1050

452888

5435583

409

3400

OSK-W-20-2275-W4

127

-49

1052

452888

5435583

409

3400

OSK-W-20-2280-W2

127

-58

1211

453304

5435639

415

3775

OSK-W-20-2280-W3

127

-58

1191

453304

5435639

415

3775

OSK-W-20-2280-W4

127

-58

1215

453304

5435639

415

3775

OSK-W-20-2280-W5

127

-58

1134

453304

5435639

415

3775

OSK-W-20-2283-W1

135

-50

1035

452997

5435607

425

3500

OSK-W-20-2283-W2

135

-50

1011

452997

5435607

425

3500

OSK-W-20-2283-W6

135

-50

957

452997

5435607

425

3500

OSK-W-20-2292-W4

125

-54

984

453035

5435561

420

3525

OSK-W-20-2295-W2

132

-51

963

452933

5435473

415

3375

OSK-W-20-2295-W3

132

-51

969

452933

5435473

415

3375

OSK-W-20-2295-W4

132

-51

1082

452933

5435473

415

3375

OSK-W-20-2313-W5

134

-52

1086

452965

5435583

420

3450

OSK-W-20-2322-W1

130

-54

1233

453608

5435715

403

4075

OSK-W-20-2334

125

-53

1166

453397

5435557

413

3825

OSK-W-20-2367

349

-46

279

452742

5434761

398

2875

WST-20-0406

135

-8

202

453494

5435287

117

3775

WST-20-0486

130

-37

162

453359

5435209

154

3625

WST-20-0498

132

-11

169

453228

5435126

136

3475

WST-20-0502

144

-40

115

453105

5435065

231

3325

WST-20-0503

148

6

99

453105

5435065

232

3325

WST-20-0505A

183

-45

331

453227

5435125

134

3475

WST-20-0506

175

20

141

453357

5435208

156

3625

WST-20-0509

126

-20

148

453316

5435166

124

3575

WST-20-0512

159

-10

139

453315

5435164

125

3575

WST-20-0513

147

-25

184

453418

5435305

69

3725

WST-20-0514

154

-26

181

453418

5435305

69

3725

WST-20-0523A

166

-46

387

453104

5435065

231

3325

WST-20-0525

165

-20

187

453418

5435305

69

3725

WST-20-0537

132

-32

139

453316

5435166

124

3575

WST-20-0538

130

-37

142

453316

5435166

124

3575

WST-20-0539

122

-29

139

453316

5435166

124

3575

WST-20-0540

129

-42

147

453316

5435166

124

3575

WST-20-0541

150

-28

138

453315

5435165

124

3575

WST-20-0544

144

-43

144

453315

5435165

124

3575

WST-20-0563

324

-40

248

453255

5435214

96

3525

WST-20-0579

162

-38

144

453315

5435165

124

3575

WST-20-0581

181

-60

474

453177

5435126

173

3425


Lynx Zone
Mineralization occurs as grey to translucent quartz-carbonate-pyrite-tourmaline veins and pyrite replacement zones and stockworks. The vein-type is associated with haloes of pervasive sericite-pyrite ± silica alteration and contain sulphides (predominantly pyrite with minor amounts of chalcopyrite, sphalerite, galena, arsenopyrite, and pyrrhotite) and local visible gold. Replacement mineralization is associated with strong pervasive silica-sericite-ankerite ± tourmaline alteration and contains disseminated pyrite from trace to 80% with local visible gold. Pyrite stockworks can form envelopes that reach several tens of metres thick. Fuchsite alteration is common and is spatially constrained to near the gabbros. Mineralization occurs at or near geological contacts between felsic porphyritic or fragmental intrusions and the host rhyolites or gabbros and locally can be hosted along the gabbro-rhyolite contact.

Triple Lynx
Mineralization in the Triple Lynx zone is vein-type, quartz-carbonate-pyrite-tourmaline veins, associated with pervasive sericite-pyrite ± silica alteration and contain sulphides similar to the main Lynx Zone, pyrite dominated with minor other sulphides, ranging from trace to up to 70% locally, and local visible gold. Locally fuchsite is present when proximal to the gabbros. Mineralization is hosted in or at the contacts of felsic porphyritic dikes with rhyolites (locally bleached) or gabbros.

Qualified Person
The scientific and technical content of this news release has been reviewed, prepared and approved by Mr. Louis Grenier, M.Sc.A., P.Geo. (OGQ 800), Project Manager of Osisko's Windfall Lake gold project, who is a "qualified person" as defined by National Instrument 43-101 – Standards of Disclosure for Mineral Projects ("NI 43-101").

Quality Control and Reporting Protocols
True width determination is estimated at 55-80% of the reported core length interval for the zone. Assays are uncut except where indicated. Intercepts occur within geological confines of major zones but have not been correlated to individual vein domains at this time. Reported intervals include minimum weighted averages of 3.0 g/t Au diluted over core lengths of at least 2.0 metres. All NQ core assays reported were obtained by either 1-kilogram screen fire assay or standard 50-gram fire-assaying-AA finish or gravimetric finish at (i) ALS Laboratories in Val d'Or, Québec, Thunder Bay, Ontario, Sudbury, Ontario or Vancouver, British Colombia, or (ii) Bureau Veritas in Timmins, Ontario. The 1-kilogram screen assay method is selected by the geologist when samples contain coarse gold or present a higher percentage of pyrite than surrounding intervals. Selected samples are also analyzed for multi-elements, including silver, using a four acids digestion -MS61 method at ALS Laboratories. Drill program design, Quality Assurance/Quality Control ("QA/QC") and interpretation of results is performed by qualified persons employing a QA/QC program consistent with NI 43-101 and industry best practices. Standards and blanks are included with every 20 samples for QA/QC purposes by the Corporation as well as the lab. Approximately 5% of sample pulps are sent to secondary laboratories for check assay.

About the Windfall Gold Deposit
The Windfall gold deposit is located between Val-d'Or and Chibougamau in Eeyou Istchee James Bay, Québec, Canada. The mineral resource defined by Osisko, as disclosed in the news release dated February 19, 2020 and supported by the technical report entitled “An updated mineral resource estimate for the Windfall Lake Project, Located in the Abitibi Greenstone Belt, Urban Township, Eeyou Istchee James Bay, Québec, Canada” and dated April 3, 2020 (with an effective date of January 3, 2020), and assuming a cut-off grade of 3.5 g/t, comprises 4,127,000 tonnes at 9.1 g/t Au (1,206,000 ounces) in the indicated mineral resource category and 14,532,000 tonnes at 8.40 g/t Au (3,938,000 ounces) in the inferred mineral resource category. The key assumptions, parameters and methods used to estimate the mineral resource estimate disclosed in the February 19,2020 news release are further described in the full technical report prepared by Micon International Limited ("Micon") and BBA Inc ("BBA"), in accordance with NI 43-101 available on SEDAR (www.sedar.com) under the Corporation's issuer profile. The Windfall gold deposit is currently one of the highest-grade resource-stage gold projects in Canada and has world-class scale. Mineralization occurs in three principal zones: Lynx, Main Zone, and Underdog. Mineralization is generally comprised of deformed sub-vertical zones plunging to the northeast. Vein-type or pyrite replacement-type styles of mineralization crosscut syn-volcanic host rocks and syn-deformation felsic porphyry intrusions and are spatially associated with the contacts of the intrusions. The deposit is well defined from surface to a depth of 1,200 metres and remains open along strike and at depth. Mineralization has been identified 30 metres from surface in some areas and as deep as 2,000 metres in others, with significant potential to extend mineralization down-plunge and at depth.

About Osisko Mining Inc.
Osisko is a mineral exploration company focused on the acquisition, exploration, and development of precious metal resource properties in Canada. Osisko holds a 100% interest in the high-grade Windfall gold deposit located between Val-d'Or and Chibougamau in Québec and holds a 100% undivided interest in a large area of claims in the surrounding Urban Barry area and nearby Quévillon area (over 2,700 square kilometres).

Cautionary Note Regarding Forward-Looking Information
This news release contains "forward-looking information" within the meaning of the applicable Canadian securities legislation that is based on expectations, estimates, projections and interpretations as at the date of this news release. Any statement that involves predictions, expectations, interpretations, beliefs, plans, projections, objectives, assumptions, future events or performance (often, but not always, using phrases such as "expects", or "does not expect", "is expected", "interpreted", "management's view", "anticipates" or "does not anticipate", "plans", "budget", "scheduled", "forecasts", "estimates", "potential", "feasibility", "believes" or "intends" or variations of such words and phrases or stating that certain actions, events or results "may" or "could", "would", "might" or "will" be taken to occur or be achieved) are not statements of historical fact and may be forward-looking information and are intended to identify forward-looking information. This news release contains the forward-looking information pertaining to, among other things: the Windfall gold deposit being one of the highest-grade resource-stage gold projects in Canada and having world-class scale; the key assumptions, parameters and methods used to estimate the mineral resource estimate; the prospects, if any, of the Windfall gold deposit; the timing and ability of Osisko, if at all, to publish a feasibility study for the Windfall gold deposit; the projected capital expenditures of mining activities at the Windfall gold deposit; upgrading an inferred mineral resource to a measured mineral resource or indicated mineral resource category; future drilling at the Windfall gold deposit; the deposit remaining open along strike to the northeast and at depth; significant high-grade zones (Lynx 4, Triple Lynx) remaining open down plunge; the plunge potential of the Lynx and Underdog zones; the significance of historic exploration activities and results. Such factors include, among others, risks relating to the ability of exploration activities (including drill results) to accurately predict mineralization; errors in management's geological modelling; the ability of Osisko to complete further exploration activities, including drilling; property and royalty interests in the Windfall gold deposit; the ability of the Corporation to obtain required approvals; the results of exploration activities; risks relating to mining activities; the global economic climate; metal prices; dilution; environmental risks; and community and non-governmental actions. Although the forward-looking information contained in this news release is based upon what management believes, or believed at the time, to be reasonable assumptions, Osisko cannot assure shareholders and prospective purchasers of securities of the Corporation that actual results will be consistent with such forward-looking information, as there may be other factors that cause results not to be as anticipated, estimated or intended, and neither Osisko nor any other person assumes responsibility for the accuracy and completeness of any such forward-looking information. Osisko does not undertake, and assumes no obligation, to update or revise any such forward-looking statements or forward-looking information contained herein to reflect new events or circumstances, except as may be required by law.

CONTACT INFORMATION:
John Burzynski
Chief Executive Officer
Telephone (416) 363-8653