SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Gold/Mining/Energy : Mining News of Note -- Ignore unavailable to you. Want to Upgrade?


To: LoneClone who wrote (164153)3/10/2022 3:24:11 PM
From: LoneClone  Read Replies (1) | Respond to of 192974
 
Fabled Silver: Planning of Phase 2 Defination Diamond Program on the Santa Maria Property Ongoing

accesswire.com

Wednesday, March 9, 2022 10:00 AM

VANCOUVER, BC / ACCESSWIRE / March 9, 2022 / Fabled Silver Gold Corp. ("Fabled" or the "Company") (TSXV:FCO); (OTCQB:FBSGF), and (FSE:7NQ) reports that it has completed the planning for a Phase 2 definition diamond drill program on the Santa Maria Property in Parral, Mexico. An accompanying Phase 2 exploration drill program is still in the planning stage.

Peter Hawley, President, CEO reports; "The past year of exploration diamond drilling, underground diamond drilling, definition diamond drilling, and finally surface mapping and sampling, has been not only aggressive, but has resulted in over 6,900 samples collected and analyzed. This massive input of data has led our stream lined analytical team to new important understandings of the structural and mineralization controls on the western sector of the property where approximately 80% of our efforts over the past year were focused.

I would like to extend our thanks to our Project Manager Joaquin Rodriguez and senior geologist Edgar Rojas for their contribution to these important steps forward."

When the Company embarked on this project we were of the opinion this was a low sulfidation epithermal system deposit and contained two veins of interest. The Santa Maria and Santa Maria Dos veins. See Figure 1 below.

Figure 1 - Original Surface Map of Santa Maria Veins

Following the completion of the Phase 1 drilling we have now had time to "stop chasing the bit" and have compiled the total data collected. Through analysis of this many things have become clear.

We now know, as we suspected from the outset, that the Santa Maria vein and Santa Maria dos vein are actually the footwall and the hanging wall of a structure. What we did not know was there is a mineralized hydrothermal diorite dike following the structure, with hydrothermal breccias on both sides of the dike. See Figure 2 below

Figure 2 - Santa Maria Mineralized Dikes

These breccias were previously thought to be the Santa Maria vein. Furthermore, there are different generations of structural / mineralization controls. In addition, some of the 2021 exploration drilling intercepted some of the secondary mineralized dike structures and the Santa Maria off-set to the northeast which remains open in all directions.

To that end the Company has designed a two-prong attack to aggressively advance the Santa Maria project. The first is a second phase 100% dedicated definition diamond drill program from surface for a minimum of 5,000 meters using one dedicated drill to perform this task.

This program has already been designed with surface drill collars and underground pierce points into the mineralized Santa Maria structure chosen. See Figure 3 below.

Figure 3 - Plan View - Phase 2 Definition Diamond Drill Hole Collars

These definition drill targets were chosen based on the modelling of the first and secondary structures and mineralization, and their relationship to the 2021 high grade gold intercepts found to the west and the east. We now know that these two areas are dilation zones as a result of the intercept of 2 structures. The down plunge of these zones remain open in all directions. See Figure 4 below.

Figure 4 - Plan View - Structural Dilation Zones

An example of the western hydrothermal gold domain dilation zone is surface dill hole SM20-20 which intercepted 352.63 g/t Ag Eq with 5.61 g/t Au over 11.60 meters, including 8.40 meters grading 452.62 g/t Ag Eq with 7.24 g/t Au and hole SM20-22 which intercepted 14.40 meters grading 267.60 g/t Ag Eq with 4.95 g/t Au, including 385.07 g/t Ag Eq with 7.17 g/t Au over 9.50 meters.

The eastern dilation zone is defined in part by hole SM20-50 which reported 21.90 meters grading 349.21 g/t Ag Eq with 5.29 g/t Au, including 11.05 meters reporting 664.57 g/t Ag Eq with 10.35 g/t Au and 1.30 meters grading 4,821.98 g/t Ag containing 86.10 g/t Au. See Figure 5 below for drill hole targets and dilation zone locations.

Figure 5 - Definition Drill hole Targets and Dilation Zone Locations

Bigger Picture and Exploration.

Using the valuable 2021 drilling information, we will apply the new structural interpretation and the Santa Maria signature and controls to the rest of the property, paying particular attention to the mineralized structure. See Figure 4 above.

Detailed field mapping and structural analyses led by our senior team including our Project Manager has resulted in the below, property wide interpretation in preparation for Phase 2 exploration drill targets.

Surface sampling of the "Northeast Structure" has reported surface sampling of 1.25 meters of 72.12 g/t Ag Eq and 2.20 meters grading 116.20 g/t Ag Eq including 206.80 g/t Ag Eq over 0.80 meters. In addition, it is now realized that drill hole SM20-11 intercepted the Northeast secondary mineralized structure and reported 3 separate mineralized zones; Zone 1 from 62.80 - 95.59 meters grading 31.72 g/t Ag Eq over the 26.90 meters including 1.20 meters grading 110.11 g/t Ag Eq; Zone 2 from 101 - 103.20 reporting 118.57 g/t Ag Eq over the 2.20 meters and the third Zone which returned 3.50 meters grading 40.80 g/t Ag Eq.

Of particular interest are the areas for possible structural dilation zones. See the yellow circles in Figure 6 below.

Figure 6 - Property Wide Structural Interpretation

Once the field work and observations have been completed the Phase 2 exploration first priority drill targets will be defined in the coming weeks.

QA QC Procedure

Analytical results of sampling reported by Fabled Silver Gold represent core samples that have been sawn in half with half of the core sampled and submitted by Fabled Silver Gold staff directly to ALS Chemex, Chihuahua, Chihuahua, Mexico. Samples were crushed, split, and pulverized as per ALS Chemex method PREP-31, then analyzed for ME-ICP61 33 element package by four acid digestion with ICP-AES Finish. ME-GRA21 method for Au and Ag by fire assay and gravimetric finish, 30g nominal sample weight.

Over Limit Method

For samples triggering precious metal over-limit thresholds of 10 g/t Au or 100 g/t Ag, the following is being used:

Au-GRA21 Au by fire assay and gravimetric finish with 30 g sample. Ag-GRA21 Ag by fire assay and gravimetric finish.

Fabled Silver Gold monitors QA/QC using commercially sourced standards and locally sourced blank materials inserted within the sample sequence at regular intervals.

About Fabled Silver Gold Corp.

Fabled is focused on acquiring, exploring and operating properties that yield near-term metal production. The Company has an experienced management team with multiple years of involvement in mining and exploration in Mexico. The Company's mandate is to focus on acquiring precious metal properties in Mexico with blue-sky exploration potential.

The Company has entered into an agreement with Golden Minerals Company (NYSE American and TSX: AUMN) to acquire the Santa Maria Property, a high-grade silver-gold property situated in the center of the Mexican epithermal silver-gold belt. The belt has been recognized as a significant metallogenic province, which has reportedly produced more silver than any other equivalent area in the world.

Mr. Peter J. Hawley, President and C.E.O.
Fabled Silver Gold Corp.
Phone: (819) 316-0919
peter@fabledfco.com

For further information please contact:

info@fabledfco.com

The technical information contained in this news release has been approved by Peter J. Hawley, P.Geo. President and C.E.O. of Fabled, who is a Qualified Person as defined in National Instrument 43-101 - Standards of Disclosure for Mineral Projects.

Neither the TSX Venture Exchange nor its Regulations Service Provider (as that term is defined in the policies of the TSX Venture Exchange) does accept responsibility for the adequacy or accuracy of this news release.

Certain statements contained in this news release constitute "forward-looking information" as such term is used in applicable Canadian securities laws. Forward-looking information is based on plans, expectations and estimates of management at the date the information is provided and is subject to certain factors and assumptions, including, that the Company's financial condition and development plans do not change as a result of unforeseen events and that the Company obtains any required regulatory approvals.

Forward-looking information is subject to a variety of risks and uncertainties and other factors that could cause plans, estimates and actual results to vary materially from those projected in such forward-looking information. Some of the risks and other factors that could cause results to differ materially from those expressed in the forward-looking statements include, but are not limited to: impacts from the coronavirus or other epidemics, general economic conditions in Canada, the United States and globally; industry conditions, including fluctuations in commodity prices; governmental regulation of the mining industry, including environmental regulation; geological, technical and drilling problems; unanticipated operating events; competition for and/or inability to retain drilling rigs and other services; the availability of capital on acceptable terms; the need to obtain required approvals from regulatory authorities; stock market volatility; volatility in market prices for commodities; liabilities inherent in mining operations; changes in tax laws and incentive programs relating to the mining industry; as well as the other risks and uncertainties applicable to the Company as set forth in the Company's continuous disclosure filings filed under the Company's profile at www.sedar.com. The Company undertakes no obligation to update these forward- looking statements, other than as required by applicable law.

SOURCE: Fabled Silver Gold Corp.



To: LoneClone who wrote (164153)3/10/2022 3:37:41 PM
From: LoneClone  Read Replies (1) | Respond to of 192974
 
Surge Copper Intersects 357 metres of 0.59% CuEq including 92 metres of 0.84% CuEq at the Berg Deposit

ca.finance.yahoo.com

Tue, March 8, 2022, 4:00 a.m.·7 min read

TSX-V Trading Symbol: SURG
OTCQX: SRGXF
Frankfurt Trading Symbol: G6D2

VANCOUVER, BC, March 8, 2022 /CNW/ - Surge Copper Corp. (TSXV: SURG) (OTCQX: SRGXF) (Frankfurt: G6D2) ("Surge" or the "Company") is pleased to announce complete assay results for 3 holes from the Berg Deposit located on the Berg Property in British Columbia. The Company has a right to earn a 70% interest in the Berg Property from Centerra Gold. The Company completed 9 drill holes at Berg in 2021, results from 6 additional holes from Berg are pending.

Highlights

  • Hole BRG21-234 intersected 325.1 metres grading 0.42% copper equivalent from 15 metres downhole depth with the hole ending in mineralization

  • Hole BRG21-235 intersected 162 metres grading 0.69% copper equivalent from 20 metres downhole depth in the upper portion of the hole

  • Hole BRG21-236 intersected 357 metres grading 0.59% copper equivalent from 24 metres downhole depth with the hole ending in mineralization

  • All 3 holes intersected high-grade near-surface mineralization within a well-developed chalcocite blanket including:

  • The drilling completed in 2021 at Berg was the first program undertaken by Surge at the Berg Property and adds to the existing database of approximately 53,754 metres over 215 holes completed by prior operators. The Berg deposit forms a ring-like shape around a central intrusive stock, and is characterized by an extensive supergene enrichment blanket in the upper portions of the deposit. The historical drilling defined highly-fractured mineralized zones in the northeast and southern portions of the ring, and the 2021 drill program was designed to test the expansion potential of the near-surface high-grade mineralization in these areas, as well as to fill in data gaps within areas of lower drill density and provide fresh material for advanced metallurgical testwork.

    Shane Ebert, President and VP Exploration, commented: "The first three holes reported in this release were designed as relatively shallow holes and thus bottom in mineralization at depths from surface of approximately 150 metres. All three holes successfully intersected the near-surface high-grade chalcocite blanket to depths of approximately 50 to 70 metres. Results in the northeast of the deposit area, taken together with historical data, outline a 300-metre wide zone of strong copper grades that remains open to the northeast, with much stronger molybdenum grades proximal to the central stock, seen weakening outward. Additional holes from the 2021 program will help to define the expansion potential and metal zonation within this zone, both important inputs to our ongoing work to outline development scenarios."

    Details of Holes BRG21-234, 235, and 236

    Assay results have been received for holes BRG21-234, 235, and 236. Hole BRG21-234 was located in the southern part of the Berg deposit and was mineralized from the start of bedrock at 15 metres depth to the end of the hole at 340.1 metres depth. The entire hole returned 325.1 metres grading 0.30% copper, 0.016% molybdenum, and 4.3 g/t silver (0.42% copper equivalent) including a near-surface higher grade zone associated with a chalcocite blanket that returned 105 metres grading 0.57% copper, 0.028% molybdenum, and 4.6 g/t silver (0.74% copper equivalent) from 15 to 120 metres depth.

    Holes BRG21-235 and 236 were located in the northeast part of the Berg deposit. Hole BRG21-235 intersected 162 metres grading 0.37% copper, 0.075% molybdenum, and 4.3 g/t silver (0.69% copper equivalent) from 20 metres downhole depth before encountering the weakly mineralized central Berg Eocene composite intrusion which returned 145 metres grading 0.14% copper and 0.023% molybdenum from 182 metres depth to the end of the hole at 327 metres. Hole BRG21-235 also encountered the chalcocite blanket which returned 90 metres grading 0.43% copper, 0.073% molybdenum, and 4.5 g/t silver (0.75% copper equivalent) from 20 metres depth. From the start of bedrock at 8 metres to 20 metres depth, hole BRG21-235 intersected a highly oxidized leached cap that contains low copper but elevated gold and molybdenum, returning 12 metres grading 0.03% copper, 0.110% molybdenum, 0.05 g/t gold, and 4.9 g/t silver.

    Hole BRG21-236 returned 357 metres grading 0.38% copper, 0.038% molybdenum, and 5.6 g/t silver (0.59% copper equivalent) from 24 metres depth to the end of the hole at 381 metres depth. Hole BRG21-236 also encountered the chalcocite blanket which returned 92 metres grading 0.52% copper, 0.070% molybdenum, and 4.8 g/t silver (0.84% copper equivalent) from 24 to 116 metres depth. Hole BRG21-236 contained a highly oxidized leached cap from the start of bedrock at 8.6 metres depth to 24 metres, returning 0.06% copper, 0.098% molybdenum 0.06 g/t gold, and 1.9 g/t silver.

    Summary of Significant Assay Results for Berg Holes BRG21-234, 235, 236

    Drill Hole

    From
    (m)


    To (m)

    Width
    (m)1


    CuEq
    (%)2


    Cu (%)

    Mo
    (%)


    Au
    (g/t)


    Ag (g/t)

    Comments

    BRG21-234

    15

    340.1 EOH

    325.1

    0.42

    0.30

    0.016

    0.03

    4.3



    including

    15

    120

    105

    0.74

    0.57

    0.028

    0.04

    4.6

    Chalcocite
    blanket

    BRG21-235

    20

    182

    162

    0.69

    0.37

    0.075

    0.03

    4.3



    including

    20

    110

    90

    0.75

    0.43

    0.073

    0.04

    4.5

    Chalcocite
    blanket

    BRG21-235

    182

    327 EOH

    145

    0.24

    0.14

    0.023

    0.01

    1.6

    Eocene
    intrusion

    BRG21-236

    24

    381 EOH

    357

    0.59

    0.38

    0.038

    0.04

    5.6



    including

    24

    116

    92

    0.84

    0.52

    0.070

    0.05

    4.8

    Chalcocite
    blanket


    1.

    Width refers to drill hole intercepts; true widths have not been determined.

    2.

    CuEq (copper equivalent) has been used to express the combined value of copper, gold, molybdenum, and silver as a percentage of copper, and is provided for illustrative purposes only and to provide ease of comparison. No allowances have been made for recovery losses that may occur should mining eventually result. Calculations use metal prices of US$3.50/lb copper, US$1,800/oz gold, US$12/lb molybdenum, and US$22/oz silver, using the formula CuEq % = Cu % + (Au g/t x 0.750) + (Mo % x 3.43) + (Ag g/t x 0.0092).





    Figure 1. Berg drill hole location map (CNW Group/Surge Copper Corp.)



    Figure 2. Berg deposit cross-section A-A’ showing results for holes BRG21-234, 235, and 236. See Figure 1 for section location. (CNW Group/Surge Copper Corp.)



    Figure 3. Current Berg resource block model showing constraining pit and grade shells (See March 17, 2021 press release for details). (CNW Group/Surge Copper Corp.)
    Quality Control

    All drill core is logged, photographed, and cut in half with a diamond saw. Half of the core is bagged and sent to ALS Geochemistry in Kamloops, British Columbia for analysis (which is ISO/IEC 17025 accredited), while the other half is archived and stored on site for verification and reference purposes. Gold is assayed using a 30g fire assay method and 33 additional elements are analyzed by Induced Coupled Plasma (ICP) utilizing a 4-acid digestion. Duplicate samples, blanks, and certified standards are included with every sample batch and then checked to ensure proper quality assurance and quality control.

    Qualified Person

    Dr. Shane Ebert P.Geo., is the Qualified Person for the Ootsa and Berg projects as defined by National Instrument 43-101 and has approved the technical disclosure contained in this news release.

    Upcoming Catalysts

    The Company anticipates updating the market on results from the following activities:

  • Drill results from 6 remaining drill holes from the 2021 Berg drill program

  • Resource update for the Ootsa project

  • Inversion and targeting results from regional airborne geophysics, and update on regional exploration pipeline

  • Results from the West Seel metallurgical testwork program

  • About Surge Copper Corp.

    The Company owns a 100% interest in the Ootsa Property, an advanced stage exploration project containing the East Seel, West Seel and Ox porphyry deposits located adjacent to the open pit Huckleberry Copper Mine, owned by Imperial Metals. The Ootsa Property contains pit constrained NI 43-101 compliant resources of copper, gold, molybdenum, and silver in the Measured and Indicated categories.

    The Company is also earning into a 70% interest in the Berg Property from Centerra Gold. Berg is a large, advanced stage exploration project located 28 km northwest of the Ootsa deposits. Berg contains pit constrained 43-101 compliant resources of copper, molybdenum, and silver in the Measured and Indicated categories. Combined, the adjacent Ootsa and Berg properties give Surge a dominant land position in the Ootsa-Huckleberry-Berg district and control over four advanced porphyry deposits.

    On Behalf of the Board of Directors

    "Leif Nilsson"
    Chief Executive Officer

    For Further information, please contact:
    Riley Trimble, Corporate Communications & Development
    Telephone: +1 604 416 2978
    Email: info@surgecopper.com
    Twitter: @SurgeCopper
    LinkedIn: Surge Copper Corp
    c212.net

    Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

    This News Release contains forward-looking statements, which relate to future events. In some cases, you can identify forward-looking statements by terminology such as "will", "may", "should", "expects", "plans", or "anticipates" or the negative of these terms or other comparable terminology. All statements included herein, other than statements of historical fact, are forward looking statements, including but not limited to the Company's plans regarding the Berg Property and the Ootsa Property. These statements are only predictions and involve known and unknown risks, uncertainties and other factors that may cause the Company's actual results, level of activity, performance, or achievements to be materially different from any future results, levels of activity, performance, or achievements expressed or implied by these forward-looking-statements. Such uncertainties and risks may include, among others, actual results of the Company's exploration activities being different than those expected by management, delays in obtaining or failure to obtain required government or other regulatory approvals, the ability to obtain adequate financing to conduct its planned exploration programs, inability to procure labour, equipment and supplies in sufficient quantities and on a timely basis, equipment breakdown, impacts of the current coronavirus pandemic, and bad weather. While these forward-looking statements, and any assumptions upon which they are based, are made in good faith, and reflect the Company's current judgment regarding the direction of its business, actual results will almost always vary, sometimes materially, from any estimates, predictions, projections, assumptions, or other future performance suggestions herein. Except as required by applicable law, the Company does not intend to update any forward-looking statements to conform these statements to actual results.



    Surge Copper Corp. Logo (CNW Group/Surge Copper Corp.)


    Cision
    View original content to download multimedia:https://www.prnewswire.com/news-releases/surge-copper-intersects-357-metres-of-0-59-cueq-including-92-metres-of-0-84-cueq-at-the-berg-deposit-301497325.html

    SOURCE Surge Copper Corp.


    Cision
    View original content to download multimedia: newswire.ca