SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Gold/Mining/Energy : Mining News of Note -- Ignore unavailable to you. Want to Upgrade?


To: LoneClone who wrote (165748)6/7/2022 12:13:10 PM
From: LoneClone  Read Replies (1) | Respond to of 192593
 
Fireweed Zinc Acquires Mactung Tungsten Project

ca.finance.yahoo.com

Fireweed Zinc Ltd.
Tue, June 7, 2022 at 7:59 a.m.·15 min read

Expands Critical Minerals Portfolio

Location of Macmillan Pass and Mactung Projects



Figure 1. Location Map: Macmillan Pass and Mactung properties.

VANCOUVER, British Columbia, June 07, 2022 (GLOBE NEWSWIRE) -- FIREWEED ZINC LTD. (“Fireweed” or the “Company”) (TSXV: FWZ; OTCQB: FWEDF) is pleased to announce the signing of a binding Letter of Intent (LOI) for the acquisition of 100% interest in the Mactung Tungsten Project located in Yukon and Northwest Territories, Canada, immediately adjacent to its Macmillan Pass Zinc-Lead-Silver Project.

Highlights

  • Mactung is one of the largest and highest-grade tungsten deposits in the world and one of the few potential sources of scale for this critical metal outside of China.

  • Approximately 38,000 m of historic drilling1 outlined a large, high-grade tungsten resource and produced a positive historic feasibility study2.

  • Mactung is located within the traditional territories of the Kaska Dena and First Nation of Na-Cho Nyäk Dun, and the Sahtú Settlement Area.

  • Fireweed hold a right to a 100% interest in the Mactung project through a binding LOI with the Government of the Northwest Territories (“GNWT”).

  • The Mactung deposit is 13 kilometres north of Fireweed’s Tom deposit and is also accessible by the North Canol Highway providing potential for future synergies.

  • Executive Statements
    Fireweed CEO Brandon Macdonald commented, “While Macmillan Pass continues to be our flagship project, the recent staking of Gayna River and the addition of Mactung turns Fireweed into one of the leading critical mineral exploration companies. We now have not only one of the largest undeveloped zinc resources in the world at our Macmillan Pass Project, but also one of the world’s largest and highest-grade undeveloped tungsten projects at the advanced stage Mactung Project. With both zinc and tungsten being designated as critical minerals by Canada, the US, and the EU, Fireweed is positioned to leverage the transition to a sustainable green economy. We are excited to be advancing both projects under the Fireweed umbrella to not just maximize value for Fireweed shareholders, but to also create increased opportunities for local Indigenous groups and the people of both Yukon and Northwest Territories.”

    Mactung Project Overview

    Mactung is one of the largest and highest-grade tungsten deposits in the world. It is an advanced stage project with extensive drilling, engineering, metallurgy, geotechnical, and environmental baseline data collected by previous owners that supported a Feasibility study in 20092. Skarn mineralization is developed in carbonate rocks near the contact with a granite intrusion. Historic 2007 indicated resources1 totaled 33.0 million tonnes grading 0.88% WO3 (tungsten trioxide) plus historic inferred resources of 11.8 million tonnes grading 0.78% WO3. The 37.6 km2 property is located adjacent to Fireweed’s Macmillan Pass Property (Figure 1) and accessed by the same road providing potential for future project synergies.

    Mactung Deposit Location & History
    The Mactung Property adjoins Fireweed’s Macmillan Pass Property and straddles the boundary between the Yukon and Northwest Territories. The Mactung tungsten deposit is located 13 km north of the Tom deposit (Figure 1). The Mactung Property can be reached by an access road that joins the North Canol Highway 230 km from Ross River, or by the government-maintained Macmillan Pass airstrip near the Tom deposit.

    Mactung was discovered and staked in 1962 by an Amax geologist. Extensive drilling, metallurgical testing, and multiple historical resource estimates were completed over the next twenty years. The property changed ownership several times and was subsequently acquired by the North American Tungsten Corporation (NATC) in 1997. In 2007 NATC published updated mineral resources (see below) and in 2009 published a positive feasibility study (available at www.sedar.com under the NATC profile). The Yukon Environmental and Socio-economic Assessment Board issued a positive screening report for the Mactung Project in June 2014 and recommended it proceed to licensing without review, subject to terms and conditions, which were subsequently adopted and supplemented by the Yukon Government in its September 2014 Decision Document. However, in June 2015 NATC filed for and was granted creditor protection mainly related to operation of their Cantung mine located further south. The GNWT purchased the Mactung Project for $4.5 million in the fall of 2015, and subsequently obtained a Class 4 Mining Land Use Approval in 2020. Fireweed Zinc has now signed a binding LOI for acquisition of the Mactung Project with the GNWT (see details below).

    Sustainability Context
    Fireweed respectfully acknowledges that the Mactung Project is located within the traditional territories of the Kaska Dena and First Nation of Na-Cho Nyäk Dun, and the Sahtú Settlement Area. For the benefit of present and future generations, Fireweed will conduct mineral development activities in a sustainable manner by working collaboratively with Indigenous groups and local communities, establishing a respectful and safe working environment, achieving a high standard of environmental stewardship, and undertaking studies and implementing measures to address local interests and issues.

    Mactung Geology & Mineralization
    Mactung is a tungsten skarn deposit located on the eastern margin of the Selwyn basin in the Canadian Cordillera’s Tombstone-Tungsten Belt (TTB). The mid-Cretaceous TTB spans Alaska, Yukon, and NWT, and hosts many other significant mineral deposits. The Mactung deposit is associated with Tungsten suite intrusions that intruded late Precambrian to Palaeozoic, variably metamorphosed clastic and interbedded carbonate rocks of the Selwyn basin. The tungsten mineralization at Mactung is comprised mostly of scheelite (CaWO4) and is dominated by calcic mineral assemblages associated with abundant pyrrhotite that developed within permeable limestone units of the Cambrian-Ordovician host rocks. Although the previous feasibility study considered only underground development, the vast majority of tungsten mineralization at Mactung can be found within 200 m from surface.

    Mactung Historic Drilling and Historic Estimates

    Geological mapping and surface sample programs were conducted in the early and mid-1960’s, with drilling beginning in 1968. To date, approximately 38,000 m of drilling in 312 holes have been completed on the property, in addition to multiple historic resource estimates. An adit was opened in 1973 to enable underground exploration and bulk sampling; at least 1,200 metres of lateral underground development has occurred, including bulk samples of 270 tonnes in 1973, 3.5 tonnes in 1979, 650 tonnes in 1983, and 79 tonnes in 2005, enabling extensive metallurgical test work2.

    Year

    Zone

    Territory

    Historic Estimate Type

    Tonnage
    (million tonnes)

    Grade
    (% WO3)

    Cut-Off Grade
    (% WO
    3)

    2009

    2B

    YT only

    Probable Mineral Reserve2

    10.79

    1.187%

    0.616%

    2007

    2B, 3D
    3E, 3F

    Yukon NWT

    Indicated Mineral Resource1

    33.03

    0.88%

    0.5%

    2007

    2B, 3D
    3E, 3F

    Yukon NWT

    Inferred Mineral Resource1

    11.86

    0.78%

    0.5%


    Table 1*. Most recent historic mineral resource and mineral reserve estimates from reports on www.sedar.com under NATC profile. (See Cautionary and Background Statements regarding Historic Minerals Resources below.)

    Mactung Future Plans
    Following final due diligence work and signing of the definitive asset purchase agreement with GNWT, Fireweed will undertake validation programs on previous work in order to support the development of a new mineral resource estimate for the project. Fireweed plans to follow this work with a new PEA on the project in 2023 and will also be evaluating synergies with the Macmillan Pass Project for the future.

    About Tungsten
    Tungsten is the hardest metal with the highest melting point which makes it an important and often essential metal for use in the automotive, technology, energy, military and manufacturing industries. World tungsten production is dominated by China and there is currently little Western tungsten production which has led tungsten to be listed as a critical mineral by many governments, including Canada. The Canadian government has developed several initiatives to support and advance the exploration and mining of critical metals in Canada, including zinc and tungsten.

    Terms of the Mactung Acquisition Agreement
    Fireweed and the GNWT have signed a binding Letter of Intent (LOI) under which the GNWT will sell the Mactung Project to Fireweed for a total purchase price of C$15,000,000 staged as follows:

  • Fireweed pays the GNWT the sum of $1,500,000 upon execution of this binding LOI;

  • Fireweed will pay to GNWT an additional $3,500,000 within 18 months upon finalization of the definitive agreement;

  • Fireweed will pay to GNWT an additional $5,000,000 upon Fireweed announcing its intention to construct a mine on either the Mactung Project or any portion of the mineral property interests controlled by Fireweed in the Yukon, commonly known as the Macmillan Pass project; and

  • Fireweed will pay to GNWT an additional $5,000,000 upon Fireweed announcing its intention to construct a mine on the Mactung Project.

  • The final definitive agreement is targeted before the end of 2022, after which ownership of the project assets will be transferred to Fireweed. Mactung carries an existing NSR Royalty of 4% which is held by a third party, 2% of which can be purchased at any time for $2.5M. This binding LOI does not include responsibility for any assets or liabilities related to the defunct Cantung mine located further south; this LOI is solely related to the Mactung Project (Fig. 1).

    Qualified Person Statement
    Technical information in this news release has been approved by Brandon Macdonald, P.Geo., and a ‘Qualified Person’ as defined under Canadian National Instrument 43-101.

    About Fireweed Zinc Ltd. (TSXV: FWZ; OTCQB: FWEDF; FSE:20F): Fireweed Zinc is a public mineral exploration company on the leading edge of critical minerals project development. The Company has three projects located in northern Canada:

  • Macmillan Pass Zinc-Lead-Silver Project: Fireweed owns 100% of the district-scale 940 km2 Macmillan Pass project in Yukon, Canada, which is host to the Tom and Jason zinc-lead-silver deposits with current Mineral Resources and a PEA economic study (see Fireweed news releases dated 10th January 2018, and 23rd May 2018, respectively, and reports filed on www.sedar.com for details) as well as the Boundary Zone, Boundary Zone West, Tom North Zone and End Zone which have significant zinc-lead-silver mineralization drilled but not yet classified as mineral resources. The project also includes large blocks of adjacent claims with known showings and significant upside exploration potential. Plans for 2022 include a large drill program toward expanded mineral resources and an updated PEA to include large new zones of mineralization defined since 2018 including Boundary Zones.

  • Mactung Tungsten Project: The Company has a binding Letter of Intent to acquire 100% interest in the 37.6 km2 Mactung Tungsten Project located adjacent to the Macmillan Pass Project. Mactung contains historic resources that make it one of the largest and highest-grade undeveloped tungsten resources in the world. Located in Canada, it is one of the rare large tungsten resources outside of China.

  • Gayna River Zinc-Gallium-Germanium Project: Fireweed has 100% of the 128.75 km2 Gayna River project located 180 kilometres north of the Macmillan Pass Project. It is host to extensive critical minerals mineralization including zinc, gallium and germanium as well as lead and silver, outlined by 28,000 metres of historic drilling and significant upside potential.

  • In Canada, Fireweed (TSXV: FWZ) trades on the TSX Venture Exchange. In the USA, Fireweed (OTCQB: FWEDF) trades on the OTCQB Venture Market for early stage and developing U.S. and international companies. Companies are current in their reporting and undergo an annual verification and management certification process. Investors can find Real-Time quotes and market information for the Company on www.otcmarkets.com. In Europe, Fireweed (FSE: 20F) trades on the Frankfurt Stock Exchange.

    Additional information about Fireweed Zinc and its projects, including maps and drill sections can be found on the Company’s website at www.FireweedZinc.com and at www.sedar.com.

    ON BEHALF OF FIREWEED ZINC LTD.

    Brandon Macdonald

    CEO & Director

    Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

    Cautionary Statements

    Forward Looking Statements
    This news release may contain “forward-looking” statements and information relating to the Company and the Macmillan Pass, Mactung and Gayna River Projects that are based on the beliefs of Company management, as well as assumptions made by and information currently available to Company management. Such statements reflect the current risks, uncertainties and assumptions related to certain factors including but not limited to, without limitations, exploration and development risks, expenditure and financing requirements, general economic conditions, changes in financial markets, the ability to properly and efficiently staff the Company’s operations, the sufficiency of working capital and funding for continued operations, title matters, First Nations relations, operating hazards, political and economic factors, competitive factors, metal prices, relationships with vendors and strategic partners, governmental regulations and oversight, permitting, seasonality and weather, technological change, industry practices, and one-time events. Additional risks are set out in the Company’s prospectus dated May 9, 2017 and filed under the Company’s profile on SEDAR at www.sedar.com. Should any one or more risks or uncertainties materialize or change, or should any underlying assumptions prove incorrect, actual results and forward-looking statements may vary materially from those described herein. The Company does not undertake to update forward-looking statements or forward-looking information, except as required by law.

    Cautionary and Background Statements regarding Historic Estimates
    A 2007 Technical Report1 on the Mactung Tungsten Deposit prepared by Wardrop for the NATC reported an Indicated Mineral Resource of 33,029 kt grading 0.88% WO3 and an Inferred Mineral Resource of 11,857 kt grading 0.78% WO3. The following assumptions were made during the calculation of this historical Mineral Resource: 1.) CIM definitions (December 2005) were followed for the classification of the mineral resources, 2.) Kriging interpolation estimates were reported at a block cut-off of 0.5% WO3, which are based on assays capped at unique levels for each zone, 4.) Blocks were modeled as 10 m x 10 m, with a minimum vertical thickness of 4.5 m. Grades were diluted accordingly, if required, as modeled mineralized envelopes range in thickness from 1 m to over 50 m. Average thickness of the mineralized lenses is approximately 18 m, 5.) Tonnage was estimated by multiplying the block’s respective volume by the specific gravity (“SG”). The SG was based on densities established by an underground bulk sample taken from the 2B zone as well as data used in previous studies. Wardrop did not review any data or calculations related to the SG determination.

    A 2009 Amended Technical Report2 on the Mactung Property produced by Wardrop for NATC reported a probable mineral reserve estimate of 10,790 kt grading 1.1869% WO3. The following assumptions were made during the calculation of this historical mineral reserve estimate: 1.) Mineral reserves reported follow the NI 43-101 definition of “the economically mineable part of a measured or Indicated Mineral Resource demonstrated by at least a Preliminary Feasibility Study”, 2.) A mining cut-off grade of 0.616% WO3 was calculated based on underground operating cost estimates obtained from Wardrop’s October 2007 Internal Economic Update, 3.) Calculation of the underground mineral reserves was limited in extent to mining the measured and indicated mineral resources located within the Yukon, 4.) A combination of Long-hole (LH) Stoping and Mechanized Cut-and-Fill (MCF) mining techniques will be used. LH stoping is the primary mining method and only regions where the mineralization is less than 12 m thick or dips steeply, will be mined with MCF, 5.) For the LH stoping method, reserves were calculated using a total recovery factor of 73.2% and 12% dilution, grading 0.1% WO3. For the MCF method, reserves were calculated at a total recovery factor of 83.5% and 9% dilution, grading 0.1% WO3, 6.) A 3-D block model was designed with 10 m x 10 m x 10 m blocks, using the following parameters: northing, easting and elevation coordinates, zone identification, resource category, WO3 percentage, and zone percentage (percentage of the block that lies within the zone), 7.) Probable mineral reserves were calculated by Wardrop using Gemcom SurpacTM Version 6.02 software.

    The reader is cautioned that a qualified person has not done sufficient work to classify the historical estimates in this news release as current mineral resources or mineral reserves. The Company has not verified these historical resources and is not treating the historical estimates as current mineral resources or mineral reserves. While these estimates were prepared in accordance with National Instrument 43-101 and the “Canadian Institute of Mining, Metallurgy and Petroleum Standards on Mineral Resources and Mineral Reserves Definition Guidelines” in effect at the time, there is no assurance that they are in accordance with current standards and these resource estimates should not be regarded as consistent with current standards or unduly relied upon as such. Fireweed includes these historical estimates in this news release for information purposes as they represent relevant material historical data which have previously been publicly disclosed and are accessible online. To the Company’s knowledge, the 2007 technical report is the most recent mineral resource estimate available for the Mactung deposits and the 2009 preliminary economic study is the most recent economic study. Further and updated work is needed to validate the drill hole database, associated assay results, economics and other pertinent information. Fireweed plans to prepare updated NI 43-101 compliant mineral resource estimate and preliminary economic studies and reports for the Mactung deposits in the coming year.

    A photo accompanying this announcement is available at globenewswire.com

    References

    1Scott Wilson Roscoe Postle Associates Inc., 2007. Technical Report on the Mactung Tungsten Deposit, Macmillan Pass, Yukon. Prepared for North American Tungsten Corporation Limited by P.A. Lacroix and R.B. Cook.

    2Wardrop Engineering Inc., 2009. Amended Technical Report on the Mactung Property – Yukon, Canada. Prepared for North American Tungsten Corporation Limited.

    3Northwest Territories Geological Survey, 2018. NWT Open File 2018-02. Geology of the Mactung tungsten skarn and area-Review and 2016 field observations. Report by B.J. Fischer, E. Martel, and H. Falck.

    4Elongo, V., Lecumberri-Sanchez, P., Legros, H., Falck, H., Adlakha, E., & Roy-Garand, A., 2020. Paragenetic constraints on the Cantung, Mactung and Lened tungsten skarn deposits, Canada: Implications for grade distribution. Ore Geology Reviews, 125, 103677.

    Contact:
    Brandon Macdonald
    Phone: (604) 646-8361




    To: LoneClone who wrote (165748)6/8/2022 2:30:34 PM
    From: LoneClone  Read Replies (1) | Respond to of 192593
     
    Trilogy Metals Announces Details of the 2022 Field Exploration Program

    ca.finance.yahoo.com

    Wed, June 8, 2022 at 3:30 a.m.·9 min read

    VANCOUVER, BC, June 8, 2022 /CNW/ - Trilogy Metals Inc. (TSX: TMQ) (NYSE: TMQ) ("Trilogy" or the "Company") is pleased to announce that Ambler Metals LLC ("Ambler Metals"), the joint venture operating company equally owned by Trilogy and South32 Limited (ASX, LSE, JSE: S32; ADR: SOUHY) ("South32"), has commenced mobilization for the upcoming exploration field program at the Upper Kobuk Mineral Projects ("UKMP") located in northwestern Alaska. The UKMP includes the Arctic (volcanogenic massive sulphide, or "VMS") deposit ("Arctic"), the Bornite (carbonate-hosted copper, or "CHC") deposit ("Bornite"), and prospective adjoining mining claims.

    On May 11, 2022, the owners of Ambler Metals approved an updated summer field program resulting in an overall fiscal 2022 budget of approximately US$26.2 million for the advancement of the UKMP. The entire amount is fully funded by Ambler Metals and will consist of a minimum 10,000 meters of diamond drilling with additional meters contingent on drill performance, weather and approval of supplementary budgets.

    The 2022 exploration program is aligned with the strategy developed by Trilogy and South32. Priorities are advancing Arctic with additional infill drilling to further improve the confidence in the resource and the completion of a geotechnical study to further de-risk the project. Exploration outside of the Arctic deposit will focus on discovering copper-rich satellite deposits near Arctic, and in the Cosmos Hills and the Ambler Lowlands along strike from Bornite (see Figure 1).

    Preparations are underway with the mobilization of crews and equipment in progress, and drilling is expected to commence in early June. Major Drilling ("Major") was awarded a multi-year contract to provide three diamond drill rigs with crews. Major has experience at the UKMP from drill campaigns in 2017, 2018 and 2019. The drill program is helicopter-supported and is based out of Ambler Metals' expanded 90-person camp at Bornite.

    Tony Giardini, President and CEO of Trilogy, commented, "I am very excited that we will soon be opening camp for the 2022 exploration program. We expect to commence drilling by early June with first assay results being available in early fall. The proposed exploration program will be one of the largest programs in the history of drilling within the Ambler Mining District and we expect that it will allow us to expand our geological knowledge of this emerging world-class mining district."

    Richard Gosse, VP Exploration of Trilogy, commented, "We are pleased with the collaboration between South32, Ambler Metals and Trilogy geoscientists in developing this year's exploration program. The team had numerous meetings to interpret and discuss the results of last year's program and they've come up with some very compelling targets and target areas, ranging from reconnaissance targets to well mineralized prospects that have never previously been drilled – that are a priority for the Ambler Metals team to evaluate this summer."

    Arctic Work Plan

    Following last year's 4,100-meter (18-hole) infill, metallurgical and geotechnical drill program, this year's program involves a minimum 6,000 meters in 27 holes, as part of an 8,400-meter infill program to increase confidence from Indicated to Measured in areas of the mineral resource block model that would be mined during the first four years of production based on Trilogy's Feasibility Study[†] mine plan and with the highest estimated value (see Figure 2).

    In addition, three to five holes totaling 500 to 750 meters are planned to complete a geotechnical and hydrogeological assessment of Arctic that SRK Consulting commenced last year.

    Ambler Belt: VMS Exploration

    During the 2021 field season, geological mapping near Arctic assisted in defining three shallow VMS targets that Ambler Metals plans to drill this summer (see Figure 3). All three targets are visible in the airborne electromagnetic ("EM") data acquired during the 2019 Versatile Time Domain Electromagnetic ("VTEM") survey that was recently reprocessed by Condor Geophysics. A first pass drill program at the three targets will require a minimum of 1,100 meters.

  • Riley Ridge – Located 2km NW of Arctic. Conductor plate modelling defined a discrete conductor approximately 100 to 200 meters from surface, beneath meta-rhyolite and silicified graphite mica schist that are interpreted to be the immediate hanging wall of the projected Arctic horizon. The conductor is the easternmost in a string of VTEM anomalies that trends for 6km across the COU target area that was mapped by Ambler Metals last year.

  • 98-9 – Located 3-4km NE of Arctic. The 98-9 prospect was discovered by Kennecott in 1998 but has never been drilled. Outcropping copper oxide mineralization occurs within a 50-meter vertical thickness of folded and altered Ambler sequence in two narrow gullies over 100 meters. Along strike to the south is a moderate airborne EM anomaly that is +500 meters in length and covered by alluvium. Kennecott completed three short soil lines over the EM anomaly, which produced a moderately strong Cu-Zn-Pb (+Ba-Cd-Au) anomaly. Further work was recommended, however Kennecott ceased exploration in the belt later that year.

  • East Dead Creek – Located 6km NW of Arctic. East Dead Creek was discovered by Kennecott in 1998 while following up top ranked airborne EM anomalies. At the time, alteration at East Dead Creek was noted to be the most intense in the district outside of Arctic and a soil survey outlined a 1.4km by 1km area of anomalous base metal geochemistry. Due to weather and safety, Kennecott drilled only one of their five drill targets at East Dead Creek – hole 98-3-01 collared uphill of sub-cropping gossan, encountered three 1 to 4.5-meter-thick zones of semi-massive sulphides with chalcopyrite and sphalerite in the top 40 meters of the hole. Conductor plate modelling of the VTEM data defined several strong shallow conductors above a weakly conductive horizon interpreted to be the graphitic schist intersected in the lower part of hole 98-3-01. Ambler Metals' first hole will be directed towards the strongest of these shallow conductors, located about 600 meters up dip of the semi-massive sulphides in hole 98-3-01.

  • In addition, Ambler Metals plans to conduct additional geological mapping and soil sampling at several other VMS prospects in the belt, including Ambler, Dead Creek, Sunshine and COU, as well as at high-priority VTEM anomalies.

    __________________________



    "Arctic Feasibility Study Alaska, USA NI 43-101 Technical Report" with an effective date of August 20, 2020 and a release date of October 2, 2020




    Cosmos Hills and the Ambler Lowlands: CHC Exploration

    Last year's exploration program for CHC, including soil sampling, detailed structural mapping, relogging historical core, trenching and two drill holes, outlined four areas for drilling. This year, in addition to drilling, which is expected to total about 2,400 meters, further detailed mapping and soil sampling and a minimum 2,000 meters of trenching are planned around Pardner Hill and the Bornite East target area.

  • Bornite West – Last year, hole RC21-267, a scout hole located 2km west of Bornite, encountered low grade copper in Bornite sequence carbonates. The intersection is encouraging as the hole was sited about one kilometer along the projected NE trend of mineralization at Pardner Hill, a 3km copper soil and rock geochemical anomaly in rubble cropping dolostone. Follow up holes, both up-dip and down-dip of hole RC21-267 are planned for this year.

  • Pardner Hill Zone – From 1961 to 1964, Kennecott defined a zone of shallow stratabound copper mineralization over an area of approximately 150 meters by 400 meters and varying from 5 meters to 35 meters in thickness. The zone which is open to the northwest, west and southwest, will be tested with three holes this summer.

  • Pardner Hill North – An additional two scout holes located 250 to 500 meters to the NE of the Pardner Hill mineralized zone are contingent on the results of the trenching program that will begin in June.

  • Ambler Lowlands – The second hole Ambler Metals drilled targeting the Bornite sequence carbonates in 2021, hole ALL21-001, was a stratigraphic hole located in the Ambler Lowlands, a 10-kilometer-wide glaciated valley separating Arctic and Bornite that is virtually unexplored despite its proximity to these deposits. Hole ALL21-001 was designed to redrill one of the only two holes ever drilled in the valley – NANA-1, drilled in 1974, which historical drill logs show intersected dolomitized carbonate and carbonate breccia similar to the carbonates that host the Bornite deposit. Unfortunately, hole ALL21-001 was lost at a depth of 300 meters, above the expected depth of the Bornite sequence. Ambler Metals proposes to re-enter and complete the hole this summer contingent on drill production and weather.





  • Figure 1. UKMP Prospective Areas and Key Prospects (CNW Group/Trilogy Metals Inc.)



    Figure 2. Arctic Drill Plan (CNW Group/Trilogy Metals Inc.)



    Figure 3. Drilling Locations Near the Arctic Project (CNW Group/Trilogy Metals Inc.)
    Qualified Person

    Richard Gosse, P.Geo., Vice President Exploration for Trilogy, is a Qualified Person as defined by National Instrument 43-101. Mr. Gosse has reviewed the scientific and technical information in this news release and approves the disclosure contained herein.

    About Trilogy Metals

    Trilogy Metals Inc. is a metals exploration and development company which holds a 50 percent interest in Ambler Metals LLC, which has a 100 percent interest in the Upper Kobuk Mineral Projects in northwestern Alaska. On December 19, 2019, South32, a globally diversified mining and metals company, exercised its option to form a 50/50 joint venture with Trilogy. The UKMP is located within the Ambler Mining District which is one of the richest and most-prospective known copper-dominant districts in the world. It hosts world-class polymetallic VMS deposits that contain copper, zinc, lead, gold and silver, and carbonate replacement deposits which have been found to host high-grade copper and cobalt mineralization. Exploration efforts have been focused on two deposits in the Ambler Mining District – the Arctic VMS deposit and the Bornite carbonate replacement deposit. Both deposits are located within a land package that spans approximately 181,387 hectares. Ambler Metals has an agreement with NANA Regional Corporation, Inc., an Alaska Native Corporation that provides a framework for the exploration and potential development of the Ambler Mining District in cooperation with local communities. Trilogy's vision is to develop the Ambler Mining District into a premier North American copper producer.

    Cautionary Note Regarding Forward-Looking Statements

    This press release includes certain "forward-looking information" and "forward-looking statements" (collectively "forward-looking statements") within the meaning of applicable Canadian and United States securities legislation including the United States Private Securities Litigation Reform Act of 1995. All statements, other than statements of historical fact, included herein, including, without limitation, statements relating to the proposed 2022 field exploration program at the UKMP; the merits of the UKMP; the Company's ability to complete at least 10,000 meters of diamond drilling at Arctic; the completion of a geotechnical study; the Company's ability to de-risk the project; the commencement of drilling in early June; the timing of the first assays; the size of the Company's exploration program; the Company's targets for the exploration program; the Company's ability to meet its targets; the Company's ability to advance the project to a construction decision; the Company's ability to complete a minimum of 6,000 meters in 27 holes and a 9,000 meter infill program; the future conversion of Arctic resources from indicated to measured; the completion of drilling to support the completion of a geotechnical and hydrogeological assessment of Arctic; Amber Metals' plan to conduct additional geological mapping and soil sampling; the outcome of the Bornite West drilling; the start of and drilling plans for the Pardner Hill trenching program; Ambler's ability to re-enter and complete the stratigraphic hold located in the Amber Lowlands; and the Company's ability to develop the Amber Mining District into a premier North American copper producer are forward-looking statements. Forward-looking statements are frequently, but not always, identified by words such as "expects", "anticipates", "believes", "intends", "estimates", "potential", "possible", and similar expressions, or statements that events, conditions, or results "will", "may", "could", or "should" occur or be achieved. Forward-looking statements involve various risks and uncertainties. There can be no assurance that such statements will prove to be accurate, and actual results and future events could differ materially from those anticipated in such statements. Important factors that could cause actual results to differ materially from the Company's expectations include the uncertainties involving the impact of the COVID-19 pandemic; success of exploration activities, permitting timelines, requirements for additional capital, government regulation of mining operations, environmental risks, prices for energy inputs, labour, materials, supplies and services, uncertainties involved in the interpretation of drilling results and geological tests, unexpected cost increases and other risks and uncertainties disclosed in the Company's Annual Report on Form 10-K for the year ended November 30, 2021 filed with Canadian securities regulatory authorities and with the United States Securities and Exchange Commission and in other Company reports and documents filed with applicable securities regulatory authorities from time to time. The Company's forward-looking statements reflect the beliefs, opinions and projections on the date the statements are made. The Company assumes no obligation to update the forward-looking statements or beliefs, opinions, projections, or other factors, should they change, except as required by law.



    Cision
    View original content to download multimedia:https://www.prnewswire.com/news-releases/trilogy-announces-details-of-the-2022-field-exploration-program-301563598.html

    SOURCE Trilogy Metals Inc.



    Cision
    View original content to download multimedia: newswire.ca