SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Gold/Mining/Energy : Mining News of Note -- Ignore unavailable to you. Want to Upgrade?


To: LoneClone who wrote (167851)10/12/2022 11:43:59 AM
From: LoneClone  Read Replies (1) | Respond to of 192593
 
P2 Gold Drilling at BAM Intersects 1.38 g/t Gold over 80.0 meters

ca.finance.yahoo.com

P2 Gold Inc.
Wed, October 12, 2022 at 2:00 a.m.·7 min read

VANCOUVER, British Columbia, Oct. 12, 2022 (GLOBE NEWSWIRE) -- P2 Gold Inc. (“P2” or the “Company”) (TSX-V:PGLD) (OTCQB:PGLDF), reports results from 11-drill holes from the 2022 Drill Program at its gold-copper BAM Project located in the Golden Triangle in northwest British Columbia.

“We wrapped up the BAM 2022 Drill Program in late September after a very successful exploration season with 13,958 meters drilled in 95 holes,” commented Joe Ovsenek, President and CEO of P2. “An additional 59 holes are in the lab awaiting assaying, which we expect to release over the next couple of months. We believe BAM is on its way to becoming the next significant discovery in the Golden Triangle.”

BAM Project Drill Results

Select drill results (see Table 1 below for drill results) from holes BAM-032 to 037, 39, 40, 46, 47 and 49 drilled at the BAM Project include:

  • Hole BAM-032 intersected 1.30 g/t gold over 59.05 meters, including 15.0 meters grading 3.64 g/t gold;

  • Hole BAM-034 intersected 1.59 g/t gold over 36.5 meters, including 7.0 meters grading 5.63 g/t gold; and

  • Hole BAM-037 intersected 1.38 g/t gold over 80.0 meters, including 12.2 meters grading 2.43 g/t gold.

  • Drill holes BAM-032 to 037, 39, 40, 46, 47 and 49 were drilled on Section D running east-west through the center of the Monarch Gold Zone. Of these holes, BAM-032 to 34 were collared in mineralized conglomerate to the east of an interpreted carbonate horst in the center of Section D with the higher-grade gold intercepts located closer to the structure on the eastern margin of the carbonate horst. BAM-037, 038 and 039 and BAM-046, 047 and 049 were collared in mineralized siltstone to the west of the interpreted carbonate horst with the higher-grade gold intercepts located closer to the structure on the western margin of the carbonate horst. Holes BAM-35 and 036 were collared within the interpreted carbonate horst and did not encounter gold mineralization within the carbonate.

    A plan map and sections for drill holes BAM-032 to 037, 39, 40, 46, 47 and 49 of the 2022 BAM Drill Program are available here.

    The focus of the 2022 BAM Drill Program has been to find the limits of the epithermal surface mineralization and provide geologic information to aid in the interpretation of the airborne and ground geophysical surveys. This interpretation will be essential in discovering the source of the surface epithermal zone and any associated high grade and/or porphyry mineralization.

    This latest drilling has continued to define several structures that were active either during and/or after the mineralization event. Gold grades intercepted by the drilling generally increase towards these structures suggesting they are potentially related to a feeder system. In addition, it is anticipated that the identification of assay gradients within the mineralization may confirm that these structures are part of the feeder system for the surface mineralization. This will allow future programs to focus on the high-grade, structurally controlled mineralization.

    Table 1: Selected BAM Drill Results, October 2022 (BAM-032 to 037, 39, 40, 46, 47 and 49)(1, 2)


    Hole

    Collar
    Coords


    Dip/
    Azimuth

    From
    (m)

    To
    (m)

    Interval
    (m)

    Gold
    (g/t)

    Silver
    (g/t)

    Drill
    Pad

    BAM-032

    N6341978
    E387220

    -45/270

    33.95

    93.0

    59.05

    1.30

    3.64

    D-12





    incl

    43.0

    58.0

    15.0

    3.84

    6.52



    BAM-033

    N6341977
    E387222

    -70/270

    21.5

    36.0

    14.5

    0.92

    1.28

    D-12





    incl

    21.5

    24.15

    2.65

    3.11

    2.95









    44.0

    63.0

    19.0

    0.36

    2.25



    BAM-034

    N6341977
    E387225

    -70/90

    24.5

    61.0

    36.5

    1.59(3)

    3.92

    D-12





    incl

    42.0

    49.0

    7.0

    5.63(3)

    6.72









    106.5

    112.5

    6.0

    0.65

    4.54



    BAM-035

    N6341974
    E387076

    -45/90

    46.0

    57.0

    11.0

    0.65

    4.56

    D-10.5







    105.0

    141

    36.0

    1.17

    6.22







    incl

    105.0

    115.5

    10.5

    1.67

    6.43



    BAM-036

    N6341974
    E387074

    -70/90

    NSV

    D-10.5

    BAM-037

    N6341998
    E386782

    -43/270

    3.0

    83.0

    80.0

    1.38

    2.17

    D-7.5





    incl

    53.0

    65.2

    12.2

    2.43

    2.65



    BAM-039

    N6341998
    E386783

    -70/270

    3.0

    23.0

    20.0

    1.09

    2.21

    D-7.5





    incl

    3.0

    11.0

    8.0

    1.82

    3.94









    37.2

    57.00

    19.8

    1.27

    1.27



    BAM-040

    N6341997
    E386787

    -70/90

    3.0

    17.5

    14.5

    0.82

    1.72

    D-7.5







    25.0

    50.0

    25

    0.65

    1.71







    incl

    36.5

    40.5

    4.0

    1.94

    2.41



    BAM-046

    N6342002
    E386649

    -45/270

    NSV

    D-6.5

    BAM-047

    N6342002
    E386650

    -90/00

    90.7

    93.3

    2.6

    1.44

    2.08

    D-6.5

    BAM-049

    N6342001
    E386656

    -45/90

    59.05

    82.0

    22.95

    0.82

    6.54

    D-6.5





    incl

    61.0

    66.4

    5.4

    1.55

    17.61




    (1)

    True thickness to be determined.

    (2)

    All samples were submitted for preparation and analysis by ALS Global at its facilities in Terrace, BC. All samples were analyzed using multi-digestion with ICP finish and fire assay with AA finish for gold. Samples with over 10 ppm gold were fire assayed with a gravimetric finish. One in 20 samples was blank, one in 20 was a standard sample, and one in 20 samples had a sample cut from assay rejects assayed as a field duplicate at ALS Global in North Vancouver, BC.

    (3)

    One sample cut to 30.0 g/t gold.


    Quality Assurance

    Ken McNaughton, M.A.Sc., P.Eng., Chief Exploration Officer, P2 Gold, is the Qualified Person, as defined by National Instrument 43-101, responsible for the BAM Project. Mr. McNaughton has reviewed, verified and approved the scientific and technical information in this news release.

    About P2 Gold Inc.

    P2 Gold is a mineral exploration and development company focused on advancing precious metals and copper discoveries and acquisitions in the western United States and British Columbia.

    For further information, please contact:

    Joseph Ovsenek
    President & CEO
    (778) 731-1055

    P2 Gold Inc.
    Suite 1100, 355 Burrard Street
    Vancouver, BC
    V6C 2G8
    info@p2gold.com
    (SEDAR filings: P2 Gold Inc.)

    Michelle Romero
    Executive Vice President
    (778) 731-1060


    Neither the TSX Venture Exchange (the “Exchange”) nor its Regulation Services Provider (as that term is defined in the policies of the Exchange) accepts responsibility for the adequacy or accuracy of this release.

    Forward Looking Information

    This press release contains “forward-looking information” within the meaning of applicable securities laws that is intended to be covered by the safe harbours created by those laws. “Forward-looking information” includes statements that use forward-looking terminology such as “may”, “will”, “expect”, “anticipate”, “believe”, “continue”, “potential” or the negative thereof or other variations thereof or comparable terminology. Such forward-looking information includes, without limitation, information with respect to the Company’s expectations, strategies and plans for the BAM Project including the Company’s planned expenditures and exploration activities.

    Forward-looking information is not a guarantee of future performance and is based upon a number of estimates and assumptions of management at the date the statements are made. Furthermore, such forward-looking information involves a variety of known and unknown risks, uncertainties and other factors which may cause the actual plans, intentions, activities, results, performance or achievements of the Company to be materially different from any future plans, intentions, activities, results, performance or achievements expressed or implied by such forward-looking information. See “Risk Factors” in the Company’s annual information form for the year ended December 31, 2021, dated March 31, 2022 filed on SEDAR at www.sedar.com for a discussion of these risks.

    The Company cautions that there can be no assurance that forward-looking information will prove to be accurate, as actual results and future events could differ materially from those anticipated in such information. Accordingly, investors should not place undue reliance on forward-looking information.

    Except as required by law, the Company does not assume any obligation to release publicly any revisions to forward-looking information contained in this press release to reflect events or circumstances after the date hereof.