Silicon Investor (SI) -- The First Internet Community

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Technology Stocks : Year 2000 (Y2K) Embedded Systems & Infrastructure Problem -- Ignore unavailable to you. Want to Upgrade?

To: John Mansfield who wrote (139)	2/27/1998 3:07:00 PM
From: John Mansfield	Read Replies (3) \| Respond to of 618

EPRI - attempt for 'Categorizing Components/ Systems Information' This seems to be a starting point for an inventory; but it has not progressed much up till now, IMO. John ____________ 'The following information serves as a "straw man" for categorizing components and systems. It was provided by a Year 2000 member as a starting point and is known to be incomplete. Providers of information will use the list to define what they are submitting. Members looking for information will use the list to help locate a particular component or system. We are trying to come up with a standard nomenclature for all to use. Please review the list of components/systems and subtypes listed below. Remember, this is not a complete list. We need your help to improve it. Send us your comments, especially component/system and subtype additions. You can use the web site's feedback form to send this information. Examples: Components/Systems subtypes Relay fault protection Analyzer CO silica conductivity gas ' <snip> ___________ epriweb.com

To: John Mansfield who wrote (139)	2/28/1998 5:30:00 AM
From: John Mansfield	Read Replies (1) \| Respond to of 618

'compiled testing procedures that apply to process control systems' 'Process Controllers ... We've completed the assessment of our manufacturing facility, where everything processor based was itemized. As we begin to analyze and prioritize our risks, we are asking our system integrators for assistance in certifying that the systems they installed, over the last 10 years, are compliant. Beside the obvious PC based operator interface problems, I m concerned with AB PLC-5, AB SLC 500 s, PanelView display units and the related control logic. Has anyone out there compiled testing procedures that apply to process control systems?' From: "Baker, Bill" <bcbaker@ppg.com> To: y2k <year2000-discuss@year2000.com> Subject: Testing procedures: Process Controllers Date: Thu, 26 Feb 98 14:52:00 PST