Silicon Investor (SI) -- The First Internet Community

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Technology Stocks : C-Cube -- Ignore unavailable to you. Want to Upgrade?

To: BillyG who wrote (33619)	6/4/1998 9:43:00 PM
From: Peter V	Read Replies (2) \| Respond to of 50808

Billy, I stand corrected. The laser is used only for mastering. Actually, here is the explanation I got from a knowledgeable friend, which is informative for those non-techies on the thread: The laser is just used for mastering. The exposed photoresist then is treated in a bath which washes away the exposed sections to reveal a pitted landscape. A thin layer of metal is then deposited onto the surface, and then that metalized surface is placed into a nickel bath, where a significant layer of nickel is electroplated onto the metal layer. This nickel layer is then removed from the photoresist, creating a father with corresponding bumps where the pits existed in the photoresist. This father is then electroplated to create a mother, and the mother is used to create stampers, which are identical to the father (the father-making process is time-consuming and expensive, and the stampers wear out, so they go through this extra generation process so that they can go back to the father whenever they need a new stamper). That stamper (with bumps) is placed into an injection molding machine, and voila! plastic replicated discs pop out every 4 seconds (with CDs).