SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Technology Stocks : PairGain Technologies -- Ignore unavailable to you. Want to Upgrade?


To: Glenn D. Rudolph who wrote (24266)6/9/1998 8:14:00 AM
From: Stephen Neece  Read Replies (1) | Respond to of 36349
 
uesday June 9, 8:02 am Eastern Time

Company Press Release

Rockwell Expands ADSL Chipset Family To Include A Central-Office Device Set That
Delivers Breakthrough Port Density and Power Efficiency

NEWPORT BEACH, Calif.--(BUSINESS WIRE)--June 9, 1998--

High-density central-office solution uses same programmable design as recently announced client-side chip to support both
industry-standard Discrete Multitone (DMT) ADSL and forthcoming 1.5Mbps G.Lite specification.
Ultra-low-power device-set is first to offer an integrated 8-port seamless solution with native ATM support.

Rockwell Semiconductor Systems has introduced the industry's highest density, lowest power ADSL device set. Rockwell's ADSL solution is
the first to include all functional blocks from line driver to ATM physical-layer (PHY) interface as a complete central-office system solution.

Rockwell's eight-port central-office ADSL device set is the lowest-power solution available that fully supports the full-rate ANSI T1.413
Issue 2 Discrete Multitone (DMT) ADSL standard. It also features a flexible, scaleable design that will allow it to simultaneously support the
industry's forthcoming G.lite standard for easy-to-deploy, ''always-on,'' consumer-oriented 1.5Mbps Internet access services. This
versatility is expected to become increasingly important as telcos seek the flexibility to deploy a variety of ADSL services.

Both Rockwell's Octal central-office ADSL device and the company's recently announced client-side V.90/ADSL combo chipset are based on
PairGain's Falcon technology, the industry's first single-chip full rate DMT ADSL processor. Rockwell's ADSL family combines the power
of PairGain's industry-leading ADSL processor engine with Rockwell's own xDSL expertise and the company's preeminence in both
client-side and high-density central-site analog modem chipsets.

''We think it will be a significant advantage to our customers that we are focusing on both ends of the ADSL connection -- just as we've done
in the analog modem arena,'' said Raouf Halim, vice president and general manager for Rockwell's Network Access Division. ''We've also
leveraged our proven leadership in high-density central-site modem chipsets, having worked with the industry's top remote access vendors to
solve critical issues related to performance, interoperability, cost per port, and ultra-low power consumption. Add to that our expertise in
ATM technology, and what you've got is one of the first solutions tailor-made for tomorrow's cost-sensitive, high-density central-office
ADSL equipment.''

Optimized for Power, Density And Design Flexibility

Rockwell's Octal ADSL central-office device set provides the most robust solution to date for central-office applications that require low
power consumption and high port density. It has also been designed to provide telcos and their equipment suppliers with the most
cost-effective and flexible solution available for rolling out a broad and varied mix of both G.Lite and full-rate ASDL data services.

''Our solution offers the versatility to accommodate the full range of anticipated ADSL services while setting a new standard for low-power
operation and high port density,'' said Achim Hill, director of central-site ADSL Marketing for Rockwell's Network Access Division. ''Our
central-office ADSL device set also further extends one of the industry's most comprehensive portfolios of T1/E1 framers, line interface
units, ATM devices and xDSL processors. These are the critical ingredients for today's complex next-generation multi-service access boxes.''

The Octal central-office ADSL device set's advanced, low-power RISC controller manages eight ADSL line transceivers so that it can
support eight ADSL channels in DSL Access Multiplexers (DSLAMs) and other central-office remote access devices. The device set also is
the first to include a companion ATM Utopia Level II PHY chip that concentrates eight lines of data-pump traffic to reduce pin count and
enable superior routability. Plus, with power consumption limited to 1.9 W per channel in G.Lite mode and 2.7 W per channel in full-rate
mode, Rockwell's solution offers the lowest power per channel of any central-office ADSL chipset on the market.

The low overall system power of Rockwell's central-office ADSL devic set makes it an ideal solution for digital loop carriers, many of which
are remotely powered. The device set is also well positioned for the emerging deployment model of native ADSL services within
central-office switches, which require low power and a high degree of flexibility.

The transceiver portion of Rockwell's central-office Octal G.lite/ADSL device set uses a programmable, hardware-based digital signal
processing architecture that eliminates the need for external RAM and reduces overall system cost. It has also been designed to provide the low
overhead framing and fast start-up and retraining capabilities that will be required for G.lite operation.

Rockwell's G.Lite/ADSL device set uses the company's recently announced Octal ATM PHY chip, which is based on a low-cost architecture
with a UTOPIA Level 2 interface. This architecture leads to a total ADSL system solution that dramatically reduces cost per port and valuable
PCB real estate as compared to layouts using only discrete devices.

ADSL technology enables the transfer of data, video and voice communications at speeds over 100 times faster than today's 56Kbps modems
and more than 50 times faster than ISDN. Telephone companies have begun to use ADSL technology to deliver high-speed Internet access and
other advanced services to home and businesses. Full-rate ADSL technology delivers data rates of up to 8Mbps downstream and 1Mbps
upstream. Emerging G.lite ADSL specifications reduce data rates to 1.5Mbps downstream and 512Kbytes upstream and are expected to
eliminate the need for telcos to install splitter equipment or special wiring at the customer premises. The G.lite specifications are being
promoted by a consortium of leading computer and telecommunications suppliers called the Universal ADSL Working Group (UAWG), of
which Rockwell is an active member.

Samples of Rockwell's central-office Octal G.lite/ADSL device set will be available in the fourth quarter of 1998, and volume production is
scheduled to begin in the first quarter of 1999. The device set is priced at $67.50 per port in 10,000-unit volumes.