SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Strategies & Market Trends : The Final Frontier - Online Remote Trading -- Ignore unavailable to you. Want to Upgrade?


To: Tim Luke who wrote (5446)10/11/1998 2:57:00 PM
From: Gary Korn  Read Replies (1) | Respond to of 12617
 
Tim,

I've had ISDN and found it not worth the cost. Given the volume of your trading, you might look into a T1 or partial T1 (absent cable). If you are close enough to a switching site or a CLEC, you could get the line for about $200/month. Internet access on top of that, but you can choose the bandwidth (cost), and it will be dedicated. The cost gets up there, but the feed is incomparable. I've got a T1 now from home to office, and another from office to Goodnet, which is a Tier 1 provider (on the backbone).

Call USWest and also call some CLECs: eSpire may be in your area. It is at least worth exploring, and it will give you a more complete understanding of the networkers to boot.

Best,
Gary Korn



To: Tim Luke who wrote (5446)10/11/1998 4:03:00 PM
From: Due Diligence  Read Replies (1) | Respond to of 12617
 
>>>does anyone know how i can find the fastest ISP<<<

Might call and see if this company has service in your area.

USRF's technology is completely non-reliant on a hard-wire telephone line or cellular telephone system. It enables constant and mobile access to the Internet from any PC or laptop within the company's transmission area, at speeds ranging from two to 10 times faster than normal dial-up access.



To: Tim Luke who wrote (5446)10/11/1998 10:39:00 PM
From: Nazbuster  Read Replies (2) | Respond to of 12617
 
Tim, regarding ISP connection.

Keep in mind that no matter what technology you use from your home to your ISP, the most frequent delays you experience come from outside your ISP and one or more of the many "hops" the messages pass through to get from your PC, to your ISP, out from there, to the final destination, your broker or data service.

If you want the BEST connectivity, adequate speed between you and the ISP is important, but the fewest delays between you and the final destination is most important. 128K (2-channel ISDN or "shotgun" double 56k modems) would probably be OK between you and your ISP. After that, choose an ISP which does not overload its own servers and network.

If you are near a local phone exchange building (2-7 miles, depending on technology), you might be able to get ADSL which is now available. This would provide 384kb upload and download speeds for about $80 a month. This would be a 24hour/day connection, no additional phone company charges for usage. Your ISP charges could vary.

I live in Lafayette, CA, which is about 3 miles from Walnut Creek where my office is. I can get ADSL in Walnut Creek, but not in Lafayette. RATS.

The best solution is to get a VPN (Virtual Private Network) connection between you and your broker. CyberBroker in Texas support this. With VPN, the carrier guarantees level of service. It might only be 128k, but it will run like clockwork, no delays. It's like being on a leased line between you and your broker. Expensive.

Another alternative, is to find out which backbone carrier is used by your broker. If they use UUNET, for example, then find a local ISP who also uses UUNET and your messages will never leave their proprietary private network where they also guarantee level of service.

The problems arise when messages are switched to "peered" or shared networks from other backbone carriers or have to be routed through either MAE-West or MAE-East, two Metropolitan Area Exchanges which decide how to route your message across the country. These two exchanges are VERY congested and slow things down horribly.

On this point, does anyone know which backbone is used by MBTrading, Watley, CyberBroker, etc??



To: Tim Luke who wrote (5446)10/12/1998 1:12:00 AM
From: joe  Read Replies (1) | Respond to of 12617
 


tim,

>>i'm stuck with a 56k flex <<

that probably explains it all. use an x2 product (COMS).
you will get you 45-50k speed.

Make sure your ISP uses x2 also. I think 80% do by now.

joe



To: Tim Luke who wrote (5446)10/12/1998 9:29:00 PM
From: Dominick  Respond to of 12617
 
Tim:

I've heard some good responses using satellite.

Check out www.direcpc.com.