SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Gold/Mining/Energy : KOB.TO - East Lost Hills & GSJB joint venture -- Ignore unavailable to you. Want to Upgrade?


To: Stew who wrote (1156)12/20/1998 9:52:00 AM
From: Michael M. Cubrilo  Read Replies (1) | Respond to of 15703
 
The well water is not actually 'burned off', it is evaporated due to the heat. This takes energy. It simply means that much of the energy in the gas, when burned, is used to turn water into vapor.

You need a few things to have combustion: fuel, oxygen, temperature.... remove any one of these from the 'Triangle' and you can no longer support combustion. So, if you have too much water it may be enough to lower the ignition temperature and "snuff out" the fire.

Many oil and gas well fires are put out by placing explosive charges near the well head and then setting off the explosives. What the explosives do is consume the available oxygen in the immediate area due to the explosion, which in turn takes away the oxygen from the well fire and voila!.... the fire is out.

Unless there is a 'reignition source', the fire will stay out.

FYI.

Mike