Silicon Investor (SI) -- The First Internet Community

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Pastimes : Dream Machine ( Build your own PC ) -- Ignore unavailable to you. Want to Upgrade?

To: Zeuspaul who wrote (5120)	1/16/1999 7:16:00 PM
From: Sean W. Smith	Read Replies (1) \| Respond to of 14778

ZP, There is no special orientation to this pin. See page A-3 off the users manual. I find the description of the connectors in the appendix clearer than the front although there is no diagram here. They could have done better here defintely. Sean

To: Zeuspaul who wrote (5120)	1/18/1999 1:02:00 PM
From: mowa	Read Replies (1) \| Respond to of 14778

ZP, All, Sean's right, no difference on pin 8-9. Okay, well that was long and ugly. Another Celery/BH6 enters the world. Now on to phase two, which promises to be long and ugly. Multi-monitor under 98 (not my system). The first go around was traumatic. We tried: (all Diamond) AGP V550 / PCI V330 / PCI V330, AGP V550 / PCI V330, PCI V330 / PCI V330, and finally AGP & PCI single cards. As you might guess only the singles worked properly. Is their an order of operation for this is there a special win 98 driver that needs installing (I didn't get anything on the second monitor until I installed the diamond drivers). After I did instal the Diamond driver and tried to go into Display Properties/Settings the 'puter would have a protection fault (unrecoverable, thank you 98). So, I will read back through the posts and if anyone has the answer off the cuff, fire. That's the update. mowa