SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Pastimes : Dream Machine ( Build your own PC ) -- Ignore unavailable to you. Want to Upgrade?


To: Steven Bowen who wrote (5667)1/29/1999 2:16:00 PM
From: Spots  Read Replies (1) | Respond to of 14778
 
>> Overclocking assembled computer

Assembled computer isn't a bad word here. Makes perfect sense
for many people; we're here to discuss whatever is of interest.

You will probably have barriers to overclocking an assembled
computer, such as

1. Motherboard makes it difficult or impossible.

Example: The Celeron
300A is clock-locked at 4.5, meaning it always runs at 4.5
times the motherboard speed (technically the frontside bus
speed). Standard speeds are 66mhz and 100mz. The 300A
is supposed to run at 66mhz according to intel
(66mhz*4.5 = 300mhz), and it has
pin-outs that tell the motherboard to run it only at 66.

Some motherboards will ignore the pinouts and let you
set 100mhz, at which point you've overclocked the Celeron
to 450 (100*4.5). Others will not allow it but there's
a way to strap the pins to defeat the 66mhz signal to
the motherboard. Not for someone who is buying a packaged
system, probably <g>. Finally, other motherboards won't
run at 100mhz at all.

2. Memory. If you buy a 66mhz package, the memory will
probably not be rated for 100 mhz.

3. Supply. The 300A is (retail) or is about to be (OEM)
discontinued.

4. Stability. There's no guarantee you can overclock
a 300A. Some you can, some you can't. It's not a flaw
if you can't, so you can't send it back.

There are places that will build a complete system with
an overclocked Celeron, probably your only realistic bet.
Supply is the problem now, though.

Checkout minotaur.com, pcnut.com, and (I think) clifford.com.

Or wait a while. Probably there will be new opportunities
in the near future. You could end up with a 400mhz overclocked
to 600 <g>.



To: Steven Bowen who wrote (5667)1/29/1999 11:42:00 PM
From: Zeuspaul  Read Replies (1) | Respond to of 14778
 
such as the Hewlett Packard Pavilions sold at uBid, which uses the 300MHz Celeron, would I be able to (try to) overclock it to 450MHz?

In general the more proprietary a machine is the more difficult it is to change an original configuration.

If one opts for an HP or other similar machine one is also opting for a customer support package. If you start making hardware or software modifications you will most likely lose the customer support.

Zeuspaul