SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Gold/Mining/Energy : Medinah Mining Inc. (MDHM) -- Ignore unavailable to you. Want to Upgrade?


To: Ron who wrote (9235)2/17/1999 12:24:00 PM
From: Mike Gold  Read Replies (1) | Respond to of 25548
 
To all: Take at look at this diagram:

bushnet.qld.edu.au

Notice the broken up area on the diagram? That is the flat shear zone that G. House is talking about(Shear zone-a layer of cracked/broken rocks caused by shear forces.). As you can see, the good stuff is found just undernealth it.

The IP survey for Line E(They are drilling at the center of line E) shows the very highly polarized body begining at 50 meters of depth and deeper. The 30 meter level, of course is just above this..

The breccia pipe formed at the contact between the Andesites and Grandiorites rocks-with most on the Grandiorite side of the formation at the surface. Recall the Andesite rock was there first-then intruded by the grandiorite rocks then intruded by the porphyry system. Neat that the Andesites showed up undernealth...dipping at an angle through the core.......

House was careful not to use the hypish word-massive sulphides but it looks like exactly what MDIN has drilled through.(Massive sulphides >60% sulphides in the rock in the form of a large mass)

It is very obvious that MDIN is trying not to be hypish at this point. The reason is again obvious.

Also, it is quite clear that MDIN has drilled alot further than 30 meters-already-it was clever of them not to tell us what they have found so far in the porphyry system........folks.....be excited......be very excited.....