Silicon Investor (SI) -- The First Internet Community

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Gold/Mining/Energy : ECHARTERS -- Ignore unavailable to you. Want to Upgrade?

To: E. Charters who wrote (3074)	2/27/1999 9:05:00 PM
From: wharryr	Read Replies (1) \| Respond to of 3744

I'll include a few holes reported since you show interest. hole 34...53.4 feet (1197to1251.5 feet) grading 0.47 # 33...32.6 o.23 # 35...24 feet (1821 to 1845 feet) grading 0.46 # 32...15 feet 0.35 # 36 87 feet 0.291 # 37...39.2 feet 0.747 A section from hole 37 returned a 39.6foot section grading 0.617. In both holes widths ranged from 30 to 35 feet. In each case the zones were encountered at depths below 1300 feet. "Noranda drilled 6000 feet of short holes no more than 100 feet in depth where grades were only 0.16 or 0.17 but that material was way out in the mafic unit away from the contact" Chillian said. When we got down below 1200 feet everything just blossomed," Mr. Echarters ,I'm no Geologist ,but to me ,it sounds like poetry. Now that Ont. and Met. are holding hands and Robin Goad (a geologist ) Is at the helm, Would you not say that the stock will be as high as the gold is deep? Rob