SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Non-Tech : Iomega Thread without Iomega -- Ignore unavailable to you. Want to Upgrade?

To: j g cordes who wrote (8743)4/1/1999 3:58:00 PM
From: Frank Drumond  Respond to of 10072
 
It sounds like your bios settings have changed and the system is expecting to boot from the Jaz drive. You may want to examine your bios settings....not sure what you should change as the setups are so variable from system to system. Doesn't sound like a drive problem.



To: j g cordes who wrote (8743)4/1/1999 4:20:00 PM
From: Cogito  Respond to of 10072
 
JG -

I think Frank is right. Sounds like a BIOS issue. If you are not booting from a SCSI drive attached to the Adaptec card I would suggest that you disable the Adaptec BIOS. That will prevent the system from looking for bootable devices on the SCSI chain.

I can offer several other suggestions, depending upon your configuration.

I don't want to clutter the thread, so send me a private message and we can get it figured out.

- Allen


HomeMailHotSubjectMarksPeopleMarksKeepersSettings
Terms Of UseContact UsCopyright/IP PolicyPrivacy PolicyAbout UsFAQAdvertise on SI
© 2025 Knight Sac Media.  Data provided by Twelve Data, Alpha Vantage, and CityFALCON News