Copyright © 2026 Knight Sac Media. All rights reserved.https://www.siliconinvestor.com/subject.aspx?subjectid=52041Thermal Dynamics is a privately held R&D corporation in central Iowa. Joint Venture partners are currently being sought. Thermal Dynamics will soon incubate and spin-off a number of high-technology motive power, prime power, and ancillary component joint ventures. These new entities will probably provide IPOs for public participation - based on their "..Terra Tek.." power systems and components. Their new technology has basically rendered all of the current versions of INTERNAL COMBUSTION GASOLINE and DIESEL ENGINES "..totally OBSOLETE.."!! There are five major components of the Terra Tek system: 1) Terra Tek Short-Flame Technology Burners, incorporating patented and here-to-fore unseen modifications and attributes compared to typical burners. This permits these new burners to molecularize a multitude of fuels and achieve near total combustion, significantly reducing byproduct and particulte pollution. The current demonstration model creates a 1-1/2 Million BTU flame in approximately 8 inches - using typical liquid and gaseous fuels. It is also capable of handling micro-ground combustible fines such as coal, grain dusts, sawdust, and biological animal wastes. EPA tests have shown by-products of combustion and particulates are well below their permitted levels for all fuesl tested to date. Our latest modularly designed 6.5MM BTU burner was assembled and tested the week of 14APR02. It ran successfully the first time, and will be the model for all of our future units - large and small. In the near future it will be sent to an independent testing laboratory for a full battery of environmental and performance tests. This is a major milestone in our ongoing development. 2) Terra Tek High-efficiency Hot Fluid Reactors (..pseudo-boilers..) convert the short-flame energy from the burners into high-pressure hot fluid, which is immediately flashable into steam in the input (power) chamber of Terra Teck turbines and Link-&-Sprag motors. 3) Terra Tek High-efficiency, Postitive-Displacement Turbines are a unique and patent-pending design, capable of handling liquids or steam as a driving medium. They may be used equally efficiently as motors or pumps/compressors. Their internal design is symetrical so it is possible to reverse their direction at any speed. The most important feature of the Terra Tek turbines is that they will produce near 100% torque at 0.1 RPM. 100% output shaft torque can also be continuously maintained from 0.1-to-6000 RPM. Although classified as a vane-type turbine, the special patent-pending design attributes of the Terra Tek units result in no energy loses by the interference of the vanes that are just entering the power chamber in either forward or reverse mode. 4) Terra Tek High-efficiency, Postitive-Displacement Link-&-Sprag and Variable-stroke (craskshaftless) Motors have several special design attributes. First they have no crankshaft per se. All the input energy is applied to the output shaft via a link-...https://www.siliconinvestor.com/images/Logo380x132.pnghttps://www.siliconinvestor.com/subject.aspx?subjectid=5204138013210