Silicon Investor (SI) -- The First Internet Community

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Microcap & Penny Stocks : PanAmerican BanCorp (PABN) -- Ignore unavailable to you. Want to Upgrade?

To: Valkyrie who wrote (40523)	8/20/1999 11:14:00 PM
From: ISOMAN	Read Replies (1) \| Respond to of 43774

I am very impressed.. Really I am... Almost exactly what I did.. I used 12 foot 2 x 12s.. I didn't need to go o 14s.. as for the seps themselves.. I used two sheets of Birch blister board.. I glued them together with Marine glue...This stuff is impossible to separate.. well, look who I'm telling this to.. Ok..The steps themselves are 38 inches by 10 inches by 1.5 inch thick.. I also but some 1.5 inch half rounds on for the nosing.. For a finish, I'm using the natural woodgrain, with a poly urethane coating. Also I am puting a sand grit on the steps, since someone in this house is prone to accidents. I'm going to rig up some iron flatrods(1 inch thick x 1 inch x 38 inch..) I'll put two of these on each step underneath, to control any bounce from larger people... I did it on some other stairs I made and they sure cut down the noise.. Now for the kicker.. The stringer on the outside wall, is being secured with four (4) 10 ton concrete lag bolts...Right into the basement wall.... ARRROUGA! We now take you to your regularily schedule PABN thread, already in progress.